create loopback interface

Summary/usage

create loopback interface [mac <mac-addr>] [instance <instance>].

Description

Create a loopback interface. Optionally, a MAC Address can be provided. If not provided, de:ad:00:00:00:<loopId> will be used.

Example usage

The following two command syntaxes are equivalent: vpp# loopback create-interface [mac <mac-addr>] [instance <instance>] vpp# create loopback interface [mac <mac-addr>] [instance <instance>] Example of how to create a loopback interface: vpp# create loopback interface

Declaration and implementation

Declaration: create_loopback_interface_command (src/vnet/ethernet/interface.c line 879)

Implementation: create_simulated_ethernet_interfaces.

delete loopback interface

Summary/usage

delete loopback interface intfc <interface>.

Description

Delete a loopback interface.

Example usage

The following two command syntaxes are equivalent: vpp# loopback delete-interface intfc <interface> vpp# delete loopback interface intfc <interface> Example of how to delete a loopback interface: vpp# delete loopback interface intfc loop0

Declaration and implementation

Declaration: delete_loopback_interface_command (src/vnet/ethernet/interface.c line 1031)

Implementation: delete_simulated_ethernet_interfaces.

delete sub-interface

Summary/usage

delete sub-interface <interface>.

Description

Delete a sub-interface.

Example usage

Example of how to delete a sub-interface: vpp# delete sub-interface GigabitEthernet0/8/0.200

Declaration and implementation

Declaration: delete_sub_interface_command (src/vnet/ethernet/interface.c line 1046)

Implementation: delete_sub_interface.

loopback create-interface

Summary/usage

loopback create-interface [mac <mac-addr>] [instance <instance>].

Description

Create a loopback interface. Optionally, a MAC Address can be provided. If not provided, de:ad:00:00:00:<loopId> will be used.

Example usage

The following two command syntaxes are equivalent: vpp# loopback create-interface [mac <mac-addr>] [instance <instance>] vpp# create loopback interface [mac <mac-addr>] [instance <instance>] Example of how to create a loopback interface: vpp# loopback create-interface

Declaration and implementation

Declaration: create_simulated_ethernet_interface_command (src/vnet/ethernet/interface.c line 860)

Implementation: create_simulated_ethernet_interfaces.

loopback delete-interface

Summary/usage

loopback delete-interface intfc <interface>.

Description

Delete a loopback interface.

Example usage

The following two command syntaxes are equivalent: vpp# loopback delete-interface intfc <interface> vpp# delete loopback interface intfc <interface> Example of how to delete a loopback interface: vpp# loopback delete-interface intfc loop0

Declaration and implementation

Declaration: delete_simulated_ethernet_interface_command (src/vnet/ethernet/interface.c line 1013)

Implementation: delete_simulated_ethernet_interfaces.

p2p_ethernet

Summary/usage

p2p_ethernet <intfc> <mac-address> [sub-id <id> | del].

Declaration and implementation

Declaration: p2p_ethernet_add_del_command (src/vnet/ethernet/p2p_ethernet.c line 251)

Implementation: vnet_p2p_ethernet_add_del.

set interface proxy-arp

Summary/usage

set interface proxy-arp <intfc> [enable|disable].

Description

Enable proxy-arp on an interface. The vpp stack will answer ARP requests for the indicated address range. Multiple proxy-arp ranges may be provisioned.

Note: Proxy ARP as a technology is infamous for blackholing traffic. Also, the underlying implementation has not been performance-tuned. Avoid creating an unnecessarily large set of ranges.

Example usage

To enable proxy arp on a range of addresses, use: vpp# set ip arp proxy 6.0.0.1 - 6.0.0.11 Append 'del' to delete a range of proxy ARP addresses: vpp# set ip arp proxy 6.0.0.1 - 6.0.0.11 del You must then specifically enable proxy arp on individual interfaces: vpp# set interface proxy-arp GigabitEthernet0/8/0 enable To disable proxy arp on an individual interface: vpp# set interface proxy-arp GigabitEthernet0/8/0 disable

Declaration and implementation

Declaration: set_int_proxy_enable_command (src/vnet/ethernet/arp.c line 2259)

Implementation: set_int_proxy_arp_command_fn.

set ip arp

Summary/usage

set ip arp [del] <intfc> <ip-address> <mac-address> [static] [no-fib-entry] [count <count>] [fib-id <fib-id>] [proxy <lo-addr> - <hi-addr>].

Description

Add or delete IPv4 ARP cache entries.

Note: 'set ip arp' options (e.g. delete, static, 'fib-id <id>', 'count <number>', 'interface ip4_addr mac_addr') can be added in any order and combination.

Example usage

Add or delete IPv4 ARP cache entries as follows. MAC Address can be in either aa:bb:cc:dd:ee:ff format or aabb.ccdd.eeff format.

vpp# set ip arp GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

vpp# set ip arp delete GigabitEthernet2/0/0 6.0.0.3 de:ad:be:ef:ba:be

To add or delete an IPv4 ARP cache entry to or from a specific fib table:

vpp# set ip arp fib-id 1 GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

vpp# set ip arp fib-id 1 delete GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

Add or delete IPv4 static ARP cache entries as follows:

vpp# set ip arp static GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

vpp# set ip arp static delete GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

For testing / debugging purposes, the 'set ip arp' command can add or delete multiple entries. Supply the 'count N' parameter:

vpp# set ip arp count 10 GigabitEthernet2/0/0 6.0.0.3 dead.beef.babe

Declaration and implementation

Declaration: ip_arp_add_del_command (src/vnet/ethernet/arp.c line 2193)

Implementation: ip_arp_add_del_command_fn.

show ip arp

Summary/usage

show ip arp.

Description

Display all the IPv4 ARP entries.

Example usage

Example of how to display the IPv4 ARP table: vpp# show ip arp

   Time      FIB        IP4       Flags      Ethernet              Interface
   346.3028   0       6.1.1.3            de:ad:be:ef:ba:be   GigabitEthernet2/0/0
  3077.4271   0       6.1.1.4       S    de:ad:be:ef:ff:ff   GigabitEthernet2/0/0
  2998.6409   1       6.2.2.3            de:ad:be:ef:00:01   GigabitEthernet2/0/0
Proxy arps enabled for:
Fib_index 0   6.0.0.1 - 6.0.0.11

Declaration and implementation

Declaration: show_ip4_arp_command (src/vnet/ethernet/arp.c line 1465)

Implementation: show_ip4_arp.