 |
FD.io VPP
v21.01.1
Vector Packet Processing
|
|
FD.io VPP
v21.01.1
Vector Packet Processing
|
nat64 add interface address <interface> [del].
vpp# nat64 add interface address
Add/delete NAT64 pool address from specific (DHCP addressed) interface.
To add NAT64 pool address from specific interface use:
vpp# nat64 add interface address GigabitEthernet0/8/0
Declaration: nat64_add_interface_address_command (src/plugins/nat/nat64/nat64_cli.c line 979)
Implementation: nat64_add_interface_address_command_fn.
nat64 add pool address <ip4-range-start> [- <ip4-range-end>] [tenant-vrf <vrf-id>] [del].
vpp# nat64 add pool address
Add/delete NAT64 pool address.
To add single NAT64 pool address use:
vpp# nat64 add pool address 10.1.1.10
To add NAT64 pool address range use:
vpp# nat64 add pool address 10.1.1.2 - 10.1.1.5
To add NAT64 pool address for specific tenant use:
vpp# nat64 add pool address 10.1.1.100 tenant-vrf 100
Declaration: nat64_add_pool_address_command (src/plugins/nat/nat64/nat64_cli.c line 811)
Implementation: nat64_add_del_pool_addr_command_fn.
nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] [del] [interface <interface].
vpp# nat64 add prefix
Set NAT64 prefix for generating IPv6 representations of IPv4 addresses.
To set NAT64 global prefix use:
vpp# nat64 add prefix 2001:db8::/32
To set NAT64 prefix for specific tenant use:
vpp# nat64 add prefix 2001:db8:122:300::/56 tenant-vrf 10
Declaration: nat64_add_del_prefix_command (src/plugins/nat/nat64/nat64_cli.c line 947)
Implementation: nat64_add_del_prefix_command_fn.
nat64 add static bib <ip6-addr> <port> <ip4-addr> <port> tcp|udp|icmp [vfr <table-id>] [del].
vpp# nat64 add static bib
Add/delete NAT64 static BIB entry.
To create NAT64 satatic BIB entry use:
vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp
vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10
Declaration: nat64_add_del_static_bib_command (src/plugins/nat/nat64/nat64_cli.c line 876)
Implementation: nat64_add_del_static_bib_command_fn.
nat64 plugin <enable [bib-buckets <count>] [bib-memory <size>] [st-buckets <count>] [st-memory <size>] | disable>.
vpp# nat64 plugin
Enable/disable NAT64 plugin.
To enable NAT64 plugin use:
vpp# nat64 plugin enable
To enable NAT64 plugin and configure buckets/memory:
vpp# nat64 plugin enable bib-buckets <n> bib-memory <s> \
st-buckets <n> st-memory <s>
To disable NAT64 plugin:
vpp# nat64 plugin disable
Declaration: nat64_plugin_enable_disable_command (src/plugins/nat/nat64/nat64_cli.c line 790)
Implementation: nat64_plugin_enable_disable_command_fn.
set interface nat64 in|out <intfc> [del].
vpp# set interface nat64
Enable/disable NAT64 feature on the interface.
To enable NAT64 feature with local (IPv6) network interface
GigabitEthernet0/8/0 and external (IPv4) network interface
GigabitEthernet0/a/0 use:
vpp# set interface nat64 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0
Declaration: set_interface_nat64_command (src/plugins/nat/nat64/nat64_cli.c line 844)
Implementation: nat64_interface_feature_command_fn.
show nat64 bib all|tcp|udp|icmp|unknown.
vpp# show nat64 bib
Show NAT64 BIB entries.
To show NAT64 TCP BIB entries use:
vpp# show nat64 bib tcp
NAT64 tcp BIB:
fd01:1::2 6303 10.0.0.3 62303 tcp vrf 0 dynamic 1 sessions
2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp vrf 0 static 2 sessions
To show NAT64 UDP BIB entries use:
vpp# show nat64 bib udp
NAT64 udp BIB:
fd01:1::2 6304 10.0.0.3 10546 udp vrf 0 dynamic 10 sessions
2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 static 0 sessions
To show NAT64 ICMP BIB entries use:
vpp# show nat64 bib icmp
NAT64 icmp BIB:
fd01:1::2 6305 10.0.0.3 63209 icmp vrf 10 dynamic 1 sessions
Declaration: show_nat64_bib_command (src/plugins/nat/nat64/nat64_cli.c line 903)
Implementation: nat64_show_bib_command_fn.
show nat64 interfaces.
vpp# show nat64 interfaces
Show interfaces with NAT64 feature.
To show interfaces with NAT64 feature use:
vpp# show nat64 interfaces
NAT64 interfaces:
GigabitEthernet0/8/0 in
GigabitEthernet0/a/0 out
Declaration: show_nat64_interfaces_command (src/plugins/nat/nat64/nat64_cli.c line 861)
Implementation: nat64_show_interfaces_command_fn.
show nat64 pool.
vpp# show nat64 pool
Show NAT64 pool.
vpp# show nat64 pool
NAT64 pool:
10.1.1.3 tenant VRF: 0
10.1.1.10 tenant VRF: 10
Declaration: show_nat64_pool_command (src/plugins/nat/nat64/nat64_cli.c line 828)
Implementation: nat64_show_pool_command_fn.
show nat64 prefix.
vpp# show nat64 prefix
Show NAT64 prefix.
To show NAT64 prefix use:
vpp# show nat64 prefix
NAT64 prefix:
2001:db8::/32 tenant-vrf 0
2001:db8:122:300::/56 tenant-vrf 10
Declaration: show_nat64_prefix_command (src/plugins/nat/nat64/nat64_cli.c line 965)
Implementation: nat64_show_prefix_command_fn.
show nat64 session table all|tcp|udp|icmp|unknown.
vpp# show nat64 session table
Show NAT64 session table.
To show NAT64 TCP session table use:
vpp# show nat64 session table tcp
NAT64 tcp session table:
fd01:1::2 6303 64:ff9b::ac10:202 20 10.0.0.3 62303 172.16.2.2 20 tcp vrf 0
fd01:3::2 6303 64:ff9b::ac10:202 20 10.0.10.3 21300 172.16.2.2 20 tcp vrf 10
To show NAT64 UDP session table use:
#vpp show nat64 session table udp
NAT64 udp session table:
fd01:1::2 6304 64:ff9b::ac10:202 20 10.0.0.3 10546 172.16.2.2 20 udp vrf 0
fd01:3::2 6304 64:ff9b::ac10:202 20 10.0.10.3 58627 172.16.2.2 20 udp vrf 10
fd01:1::2 1235 64:ff9b::a00:3 4023 10.0.0.3 24488 10.0.0.3 4023 udp vrf 0
fd01:1::3 23 64:ff9b::a00:3 24488 10.0.0.3 4023 10.0.0.3 24488 udp vrf 0
To show NAT64 ICMP session table use:
#vpp show nat64 session table icmp
NAT64 icmp session table:
fd01:1::2 64:ff9b::ac10:202 6305 10.0.0.3 172.16.2.2 63209 icmp vrf 0
Declaration: show_nat64_st_command (src/plugins/nat/nat64/nat64_cli.c line 931)
Implementation: nat64_show_st_command_fn.
1.8.13