Nat44-ed cli reference
nat ipfix logging
nat ipfix logging disable|<enable [domain <domain-id>] [src-port <port>]>
snat ipfix logging
To enable NAT IPFIX logging use:
vpp# nat ipfix logging
To set IPFIX exporter use:
vpp# set ipfix exporter collector 10.10.10.3 src 10.10.10.1
Declaration: snat_ipfix_logging_enable_disable_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1826
Implementation: snat_ipfix_logging_enable_disable_command_fn
nat mss-clamping
nat mss-clamping <mss-value>|disable
nat mss-clamping
Set TCP MSS rewriting configuration
To enable TCP MSS rewriting use:
vpp# nat mss-clamping 1452
To disbale TCP MSS rewriting use:
vpp# nat mss-clamping disable
Declaration: nat_set_mss_clamping_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1843
Implementation: nat_set_mss_clamping_command_fn
nat set logging level
nat set logging level <level>
nat set logging level
To set NAT logging level use:
Set nat logging level
Declaration: snat_set_log_level_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1811
Implementation: snat_set_log_level_command_fn
nat44
nat44 <enable [sessions <max-number>] [inside-vrf <vrf-id>] [outside-vrf <vrf-id>]>|disable
nat44
Enable nat44 plugin
To enable nat44-ed, use:
vpp# nat44 enable
To disable nat44-ed, use:
vpp# nat44 disable
To set inside-vrf outside-vrf, use:
vpp# nat44 enable inside-vrf <id> outside-vrf <id>
Declaration: nat44_ed_enable_disable_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1722
Implementation: nat44_ed_enable_disable_command_fn
nat44 add address
nat44 add address <ip4-range-start> [- <ip4-range-end>] [tenant-vrf <vrf-id>] [twice-nat] [del]
nat44 add address
Add/delete NAT44 pool address.
To add NAT44 pool address use:
vpp# nat44 add address 172.16.1.3
vpp# nat44 add address 172.16.2.2 - 172.16.2.24
To add NAT44 pool address for specific tenant (identified by VRF id) use:
vpp# nat44 add address 172.16.1.3 tenant-vrf 10
Declaration: add_address_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1884
Implementation: add_address_command_fn
nat44 add identity mapping
nat44 add identity mapping <ip4-addr>|external <interface> [<protocol> <port>] [vrf <table-id>] [del]
nat44 add identity mapping
Identity mapping translate an IP address to itself.
To create identity mapping for address 10.0.0.3 port 6303 for TCP protocol
use:
vpp# nat44 add identity mapping 10.0.0.3 tcp 6303
To create identity mapping for address 10.0.0.3 use:
vpp# nat44 add identity mapping 10.0.0.3
To create identity mapping for DHCP addressed interface use:
vpp# nat44 add identity mapping external GigabitEthernet0/a/0 tcp 3606
Declaration: add_identity_mapping_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2008
Implementation: add_identity_mapping_command_fn
nat44 add interface address
nat44 add interface address <interface> [twice-nat] [del]
nat44 add interface address
Use NAT44 pool address from specific interfce
To add NAT44 pool address from specific interface use:
vpp# nat44 add interface address GigabitEthernet0/8/0
Declaration: snat_add_interface_address_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2082
Implementation: snat_add_interface_address_command_fn
nat44 add load-balancing back-end
nat44 add load-balancing back-end protocol tcp|udp external <addr>:<port> local <addr>:<port> [vrf <table-id>] probability <n> [del]
nat44 add load-balancing static mapping
Modify service load balancing using NAT44
To add new back-end server 10.100.10.30:8080 for service load balancing
static mapping with external IP address 1.2.3.4 and TCP port 80 use:
vpp# nat44 add load-balancing back-end protocol tcp external 1.2.3.4:80 local 10.100.10.30:8080 probability 25
Declaration: add_lb_backend_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2044
Implementation: add_lb_backend_command_fn
nat44 add load-balancing static mapping
nat44 add load-balancing static mapping protocol tcp|udp external <addr>:<port> local <addr>:<port> [vrf <table-id>] probability <n> [twice-nat|self-twice-nat] [out2in-only] [affinity <timeout-seconds>] [del]
nat44 add load-balancing static mapping
Service load balancing using NAT44
To add static mapping with load balancing for service with external IP
address 1.2.3.4 and TCP port 80 and mapped to 2 local servers
10.100.10.10:8080 and 10.100.10.20:8080 with probability 80% resp. 20% use:
vpp# nat44 add load-balancing static mapping protocol tcp external 1.2.3.4:80 local 10.100.10.10:8080 probability 80 local 10.100.10.20:8080 probability 20
Declaration: add_lb_static_mapping_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2025
Implementation: add_lb_static_mapping_command_fn
nat44 add static mapping
nat44 add static mapping tcp|udp|icmp local <addr> [<port|icmp-echo-id>] external <addr> [<port|icmp-echo-id>] [vrf <table-id>] [twice-nat|self-twice-nat] [out2in-only] [exact <pool-addr>] [del]
nat44 add static mapping
Static mapping allows hosts on the external network to initiate connection
to to the local network host.
To create static mapping between local host address 10.0.0.3 port 6303 and
external address 4.4.4.4 port 3606 for TCP protocol use:
vpp# nat44 add static mapping tcp local 10.0.0.3 6303 external 4.4.4.4 3606
If not runnig "static mapping only" NAT plugin mode use before:
vpp# nat44 add address 4.4.4.4
To create address only static mapping between local and external address use:
vpp# nat44 add static mapping local 10.0.0.3 external 4.4.4.4
To create ICMP static mapping between local and external with ICMP echo
identifier 10 use:
vpp# nat44 add static mapping icmp local 10.0.0.3 10 external 4.4.4.4 10
To force use of specific pool address, vrf independent
vpp# nat44 add static mapping local 10.0.0.2 1234 external 10.0.2.2 1234 twice-nat exact 10.0.1.2
Declaration: add_static_mapping_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1986
Implementation: add_static_mapping_command_fn
nat44 del session
nat44 del session in|out <addr>:<port> tcp|udp|icmp [vrf <id>] [external-host <addr>:<port>]
nat44 del session
To administratively delete NAT44 session by inside address and port use:
vpp# nat44 del session in 10.0.0.3:6303 tcp
To administratively delete NAT44 session by outside address and port use:
vpp# nat44 del session out 1.0.0.3:6033 udp
Declaration: nat44_del_session_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2140
Implementation: nat44_del_session_command_fn
nat44 forwarding
nat44 forwarding enable|disable
nat44 forwarding
Enable or disable forwarding
Forward packets which don't match existing translation
or static mapping instead of dropping them.
To enable forwarding, use:
vpp# nat44 forwarding enable
To disable forwarding, use:
vpp# nat44 forwarding disable
Declaration: snat_forwarding_set_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2158
Implementation: snat_forwarding_set_command_fn
set interface nat44
set interface nat44 in <intfc> out <intfc> [output-feature] [del]
set interface nat44
Enable/disable NAT44 feature on the interface.
To enable NAT44 feature with local network interface use:
vpp# set interface nat44 in GigabitEthernet0/8/0
To enable NAT44 feature with external network interface use:
vpp# set interface nat44 out GigabitEthernet0/a/0
Declaration: set_interface_snat_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1944
Implementation: snat_feature_command_fn
set nat frame-queue-nelts
set nat frame-queue-nelts <number>
set nat frame-queue-nelts
Set number of worker handoff frame queue elements.
Declaration: set_frame_queue_nelts_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1798
Implementation: set_frame_queue_nelts_command_fn
set nat timeout
set nat timeout [udp <sec> | tcp-established <sec> tcp-transitory <sec> | icmp <sec> | reset]
set nat timeout
Set values of timeouts for NAT sessions (in seconds), use:
vpp# set nat timeout udp 120 tcp-established 7500 tcp-transitory 250 icmp 90
To reset default values use:
vpp# set nat timeout reset
Declaration: set_timeout_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1767
Implementation: set_timeout_command_fn
set nat workers
set nat workers <workers-list>
set snat workers
Set NAT workers if 2 or more workers available, use:
vpp# set snat workers 0-2,5
Declaration: set_workers_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1736
Implementation: set_workers_command_fn
set nat44 session limit
set nat44 session limit <limit> [vrf <table-id>]
set nat44 session limit
Set NAT44 session limit.
Declaration: nat44_set_session_limit_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2125
Implementation: nat44_set_session_limit_command_fn
show nat mss-clamping
show nat mss-clamping
show nat mss-clamping
Show TCP MSS rewriting configuration
Declaration: nat_show_mss_clamping_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1855
Implementation: nat_show_mss_clamping_command_fn
show nat timeouts
show nat timeouts
show nat timeouts
Show values of timeouts for NAT sessions.
vpp# show nat timeouts
udp timeout: 300sec
tcp-established timeout: 7440sec
tcp-transitory timeout: 240sec
icmp timeout: 60sec
Declaration: nat_show_timeouts_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1786
Implementation: nat_show_timeouts_command_fn
show nat workers
show nat workers
show nat workers
Show NAT workers.
vpp# show nat workers:
2 workers
vpp_wk_0
vpp_wk_1
Declaration: nat_show_workers_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1752
Implementation: nat_show_workers_command_fn
show nat44 addresses
show nat44 addresses
show nat44 addresses
Show NAT44 pool addresses.
vpp# show nat44 addresses
NAT44 pool addresses:
172.16.2.2
tenant VRF independent
10 busy udp ports
0 busy tcp ports
0 busy icmp ports
172.16.1.3
tenant VRF: 10
0 busy udp ports
2 busy tcp ports
0 busy icmp ports
NAT44 twice-nat pool addresses:
10.20.30.72
tenant VRF independent
0 busy udp ports
0 busy tcp ports
0 busy icmp ports
Declaration: nat44_show_addresses_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1928
Implementation: nat44_show_addresses_command_fn
show nat44 hash tables
show nat44 hash tables [detail|verbose]
show nat44 hash tables
Show NAT44 hash tables
Declaration: nat44_show_hash src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1867
Implementation: nat44_show_hash_command_fn
show nat44 interface address
show nat44 interface address
show nat44 interface address
Show NAT44 pool address interfaces
vpp# show nat44 interface address
NAT44 pool address interfaces:
GigabitEthernet0/a/0
NAT44 twice-nat pool address interfaces:
GigabitEthernet0/8/0
Declaration: nat44_show_interface_address_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2099
Implementation: nat44_show_interface_address_command_fn
show nat44 interfaces
show nat44 interfaces
show nat44 interfaces
Show interfaces with NAT44 feature.
vpp# show nat44 interfaces
NAT44 interfaces:
GigabitEthernet0/8/0 in
GigabitEthernet0/a/0 out
Declaration: nat44_show_interfaces_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1961
Implementation: nat44_show_interfaces_command_fn
show nat44 sessions
show nat44 sessions [filter {i2o | o2i} {saddr <ip4-addr> | sport <n> | daddr <ip4-addr> | dport <n> | proto <proto>} [filter .. [..]]]
show nat44 sessions
Show NAT44 sessions.
Declaration: nat44_show_sessions_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2111
Implementation: nat44_show_sessions_command_fn
show nat44 static mappings
show nat44 static mappings
show nat44 static mappings
Show NAT44 static mappings.
vpp# show nat44 static mappings
NAT44 static mappings:
local 10.0.0.3 external 4.4.4.4 vrf 0
tcp local 192.168.0.4:6303 external 4.4.4.3:3606 vrf 0
tcp vrf 0 external 1.2.3.4:80 out2in-only
local 10.100.10.10:8080 probability 80
local 10.100.10.20:8080 probability 20
tcp local 10.100.3.8:8080 external 169.10.10.1:80 vrf 0 twice-nat
tcp local 10.0.0.10:3603 external GigabitEthernet0/a/0:6306 vrf 10
Declaration: nat44_show_static_mappings_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 2068
Implementation: nat44_show_static_mappings_command_fn
show nat44 summary
show nat44 summary
show nat44 summary
Show NAT44 summary
vpp# show nat44 summary
Declaration: nat44_show_summary_command src/plugins/nat/nat44-ed/nat44_ed_cli.c line 1898
Implementation: nat44_show_summary_command_fn