FD.io VPP  v18.01.2-1-g9b554f3
Vector Packet Processing
lisp_gpe.api
Go to the documentation of this file.
1 /*
2  * Copyright (c) 2015-2016 Cisco and/or its affiliates.
3  * Licensed under the Apache License, Version 2.0 (the "License");
4  * you may not use this file except in compliance with the License.
5  * You may obtain a copy of the License at:
6  *
7  * http://www.apache.org/licenses/LICENSE-2.0
8  *
9  * Unless required by applicable law or agreed to in writing, software
10  * distributed under the License is distributed on an "AS IS" BASIS,
11  * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
12  * See the License for the specific language governing permissions and
13  * limitations under the License.
14  */
15 
16 vl_api_version 1.0.0
17 
18 /** \brief GPE locator structure
19  @param is_ip4 - whether addr is IPv4 or v6
20  @param weight - locator weight
21  @param addr - IPv4/6 address
22 */
23 typeonly manual_print manual_endian define gpe_locator
24 {
27  u8 addr[16];
28 };
29 
30 /** \brief add or delete GPE tunnel
31  @param client_index - opaque cookie to identify the sender
32  @param context - sender context, to match reply w/ request
33  @param is_add - add address if non-zero, else delete
34  @param eid_type -
35  0 : ipv4
36  1 : ipv6
37  2 : mac
38  @param rmt_eid - remote eid
39  @param lcl_eid - local eid
40  @param rmt_len - remote prefix len
41  @param lcl_len - local prefix len
42  @param vni - virtual network identifier
43  @param dp_table - vrf/bridge domain id
44  @param action - negative action when 0 locators configured
45  @param loc_num - number of locators
46  @param locs - array of remote locators
47 */
48 manual_print manual_endian define gpe_add_del_fwd_entry
49 {
54  u8 rmt_eid[16];
55  u8 lcl_eid[16];
62  vl_api_gpe_locator_t locs[loc_num];
63 };
64 
65 define gpe_add_del_fwd_entry_reply
66 {
70 };
71 
72 /** \brief enable or disable gpe protocol
73  @param client_index - opaque cookie to identify the sender
74  @param context - sender context, to match reply w/ request
75  @param is_en - enable protocol if non-zero, else disable
76 */
77 autoreply define gpe_enable_disable
78 {
82 };
83 
84 /** \brief add or delete gpe_iface
85  @param client_index - opaque cookie to identify the sender
86  @param context - sender context, to match reply w/ request
87  @param is_add - add address if non-zero, else delete
88 */
89 autoreply define gpe_add_del_iface
90 {
97 };
98 
99 define gpe_fwd_entry_vnis_get
100 {
103 };
104 
105 manual_print manual_endian define gpe_fwd_entry_vnis_get_reply
106 {
110  u32 vnis[count];
111 };
112 
113 define gpe_fwd_entries_get
114 {
118 };
119 
120 typeonly manual_print manual_endian define gpe_fwd_entry
121 {
127  u8 leid[16];
128  u8 reid[16];
131 };
132 
133 manual_print manual_endian define gpe_fwd_entries_get_reply
134 {
139 };
140 
141 define gpe_fwd_entry_path_dump
142 {
146 };
147 
148 manual_endian manual_print define gpe_fwd_entry_path_details
149 {
154 };
155 
156 /** \brief Set GPE encapsulation mode
157  @param client_index - opaque cookie to identify the sender
158  @param context - sender context, to match reply w/ request
159  @param mode - LISP (value 0) or VXLAN (value 1)
160 */
161 autoreply define gpe_set_encap_mode
162 {
166 };
167 
168 /** \brief get GPE encapsulation mode
169  @param client_index - opaque cookie to identify the sender
170  @param context - sender context, to match reply w/ request
171  @param mode - LISP (value 0) or VXLAN (value 1)
172 */
173 define gpe_get_encap_mode
174 {
177 };
178 
179 /** \brief Reply for set_encap_mode
180  @param context - returned sender context, to match reply w/ request
181  @param retval - return code
182  @param encap_mode - GPE encapsulation mode
183 */
184 define gpe_get_encap_mode_reply
185 {
189 };
190 
191 /** \brief Add native fwd rpath
192  @param context - returned sender context, to match reply w/ request
193  @param retval - return code
194  @param is_add - flag to indicate add or del
195  @param table_id - table id for route path
196  @param nh_sw_if_index - next-hop sw_if_index (~0 if not set)
197  @param is_ip4 - flag to indicate if nh is ip4
198  @param nh_addr - next hop ip address
199 */
200 autoreply define gpe_add_del_native_fwd_rpath
201 {
208  u8 nh_addr[16];
209 };
210 
211 /** \brief get GPE native fwd rpath
212  @param client_index - opaque cookie to identify the sender
213  @param context - sender context, to match reply w/ request
214 */
215 define gpe_native_fwd_rpaths_get
216 {
220 };
221 
222 /** \brief Reply for get native fwd rpath
223  @param context - returned sender context, to match reply w/ request
224  @param retval - return code
225  @param table_id - table id for route path
226  @param nh_sw_if_index - next-hop sw_if_index (~0 if not set)
227  @param nh_addr - next hop address
228 */
229 typeonly manual_print manual_endian define gpe_native_fwd_rpath
230 {
234  u8 nh_addr[16];
235 };
236 
237 manual_print manual_endian define gpe_native_fwd_rpaths_get_reply
238 {
243 };
244 
245 /*
246  * Local Variables:
247  * eval: (c-set-style "gnu")
248  * End:
249  */
250 
vl_api_gpe_locator_t lcl_loc
Definition: lisp_gpe.api:152
u8 eid_type
Definition: lisp_gpe.api:53
u32 client_index
Definition: lisp_gpe.api:101
GPE locator structure.
Definition: lisp_gpe.api:23
u32 dp_table
Definition: lisp_gpe.api:59
u32 client_index
Definition: lisp_gpe.api:150
u8 is_add
Definition: lisp_gpe.api:52
u32 fwd_entry_index
Definition: lisp_gpe.api:69
#define vl_api_version(n, v)
Definition: jvpp_registry.c:18
u8 eid_type
Definition: lisp_gpe.api:124
u8 reid_prefix_len
Definition: lisp_gpe.api:126
int i32
Definition: types.h:81
u8 leid_prefix_len
Definition: lisp_gpe.api:125
u32 count
Definition: lisp_gpe.api:109
u8 action
Definition: lisp_gpe.api:60
u32 context
Definition: lisp_gpe.api:151
u32 context
Definition: lisp_gpe.api:144
u32 loc_num
Definition: lisp_gpe.api:61
Reply for get native fwd rpath.
Definition: lisp_gpe.api:229
Definition: lisp_gpe.api:120
u32 context
Definition: lisp_gpe.api:107
u32 vni
Definition: lisp_gpe.api:58
u32 context
Definition: lisp_gpe.api:102
vl_api_gpe_locator_t rmt_loc
Definition: lisp_gpe.api:153
u32 fwd_entry_index
Definition: lisp_gpe.api:122
u32 vni
Definition: lisp_gpe.api:129
u32 client_index
Definition: lisp_gpe.api:143
unsigned int u32
Definition: types.h:88
u8 rmt_len
Definition: lisp_gpe.api:56
size_t count
Definition: vapi.c:42
u32 context
Definition: lisp_gpe.api:68
u8 action
Definition: lisp_gpe.api:130
u32 client_index
Definition: lisp_gpe.api:50
u32 dp_table
Definition: lisp_gpe.api:123
i32 retval
Definition: lisp_gpe.api:67
unsigned char u8
Definition: types.h:56
i32 retval
Definition: lisp_gpe.api:108
u8 lcl_len
Definition: lisp_gpe.api:57
u32 fwd_entry_index
Definition: lisp_gpe.api:145
u32 context
Definition: lisp_gpe.api:51
vhost_vring_addr_t addr
Definition: vhost-user.h:83