![]() |
FD.io VPP
v18.07.1-19-g511ce25
Vector Packet Processing
|
Access List Rule entry. More...
Access List Rule entry.
| is_permit | - deny (0), permit (1), or permit+reflect(2) action on this rule. |
| is_ipv6 | - IP addresses in this rule are IPv6 (1) or IPv4 (0) |
| src_ip_addr | - Source prefix value |
| src_ip_prefix_len | - Source prefix length |
| dst_ip_addr | - Destination prefix value |
| dst_ip_prefix_len | - Destination prefix length |
| proto | - L4 protocol (http://www.iana.org/assignments/protocol-numbers/protocol-numbers.xhtml) |
| srcport_or_icmptype_first | - beginning of source port or ICMP4/6 type range |
| srcport_or_icmptype_last | - end of source port or ICMP4/6 type range |
| dstport_or_icmpcode_first | - beginning of destination port or ICMP4/6 code range |
| dstport_or_icmpcode_last | - end of destination port or ICMP4/6 code range |
| tcp_flags_mask | - if proto==6, match masked TCP flags with this value |
| tcp_flags_value | - if proto==6, mask to AND the TCP flags in the packet with |