Include dependency graph for nat.h:

This graph shows which files directly or indirectly include this file:

Data Structures
struct	snat_session_key_t

struct	nat_ed_ses_key_t

struct	snat_det_out_key_t

struct	snat_user_key_t

struct	nat44_reass_trace_t

struct	snat_user_t

struct	snat_address_t

struct	nat_outside_fib_t

struct	snat_det_session_t

struct	snat_det_map_t

struct	nat44_lb_addr_port_t

struct	snat_static_mapping_t

struct	snat_interface_t

struct	snat_static_map_resolve_t

struct	snat_main_per_thread_data_t

struct	snat_main_s

struct	nat44_is_idle_session_ctx_t

struct	snat_runtime_t

struct	icmp_echo_header_t

struct	tcp_udp_header_t

Macros
#define	SNAT_UDP_TIMEOUT 300

#define	SNAT_TCP_TRANSITORY_TIMEOUT 240

#define	SNAT_TCP_ESTABLISHED_TIMEOUT 7440

#define	SNAT_ICMP_TIMEOUT 60

#define	NAT_FQ_NELTS 64

#define	SNAT_FLAG_HAIRPINNING (1 << 0)

#define	foreach_nat_addr_and_port_alloc_alg

#define	foreach_snat_protocol

#define	foreach_snat_session_state

#define	NAT44_SES_I2O_FIN 1

#define	NAT44_SES_O2I_FIN 2

#define	NAT44_SES_I2O_FIN_ACK 4

#define	NAT44_SES_O2I_FIN_ACK 8

#define	NAT44_SES_I2O_SYN 16

#define	NAT44_SES_O2I_SYN 32

#define	NAT44_SES_RST 64

#define	SNAT_SESSION_FLAG_STATIC_MAPPING 1

#define	SNAT_SESSION_FLAG_UNKNOWN_PROTO 2

#define	SNAT_SESSION_FLAG_LOAD_BALANCING 4

#define	SNAT_SESSION_FLAG_TWICE_NAT 8

#define	SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT 16

#define	SNAT_SESSION_FLAG_FWD_BYPASS 32

#define	SNAT_SESSION_FLAG_AFFINITY 64

#define	SNAT_SESSION_FLAG_OUTPUT_FEATURE 128

#define	NAT_INTERFACE_FLAG_IS_INSIDE 1

#define	NAT_INTERFACE_FLAG_IS_OUTSIDE 2

#define	NAT_STATIC_MAPPING_FLAG_ADDR_ONLY 1

#define	NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY 2

#define	NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT 4

#define	NAT_STATIC_MAPPING_FLAG_LB 8

#define	snat_is_session_static(s) (s->flags & SNAT_SESSION_FLAG_STATIC_MAPPING)
	Check if SNAT session is created from static mapping. More...

#define	snat_is_unk_proto_session(s) (s->flags & SNAT_SESSION_FLAG_UNKNOWN_PROTO)
	Check if SNAT session for unknown protocol. More...

#define	is_twice_nat_session(s) (s->flags & SNAT_SESSION_FLAG_TWICE_NAT)
	Check if NAT session is twice NAT. More...

#define	is_lb_session(s) (s->flags & SNAT_SESSION_FLAG_LOAD_BALANCING)
	Check if NAT session is load-balancing. More...

#define	is_fwd_bypass_session(s) (s->flags & SNAT_SESSION_FLAG_FWD_BYPASS)
	Check if NAT session is forwarding bypass. More...

#define	is_ed_session(s) (s->flags & SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT)
	Check if NAT session is endpoint dependent. More...

#define	is_affinity_sessions(s) (s->flags & SNAT_SESSION_FLAG_AFFINITY)
	Check if NAT session has affinity record. More...

#define	nat_interface_is_inside(i) i->flags & NAT_INTERFACE_FLAG_IS_INSIDE
	Check if NAT interface is inside. More...

#define	nat_interface_is_outside(i) i->flags & NAT_INTERFACE_FLAG_IS_OUTSIDE
	Check if NAT interface is outside. More...

#define	nat44_is_ses_closed(s) s->state == 0xf
	Check if NAT44 endpoint-dependent TCP session is closed. More...

#define	is_addr_only_static_mapping(sm) (sm->flags & NAT_STATIC_MAPPING_FLAG_ADDR_ONLY)
	Check if NAT static mapping is address only (1:1NAT). More...

#define	is_out2in_only_static_mapping(sm) (sm->flags & NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY)
	Check if NAT static mapping match only out2in direction. More...

#define	is_identity_static_mapping(sm) (sm->flags & NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT)
	Check if NAT static mapping is identity NAT. More...

#define	is_lb_static_mapping(sm) (sm->flags & NAT_STATIC_MAPPING_FLAG_LB)
	Check if NAT static mapping is load-balancing. More...

#define	tcp_is_init(t) ((t->flags & TCP_FLAG_SYN) && !(t->flags & TCP_FLAG_ACK))
	Check if client initiating TCP connection (received SYN from client) More...

#define	nat_log_err(...) vlib_log(VLIB_LOG_LEVEL_ERR, snat_main.log_class, __VA_ARGS__)

#define	nat_log_warn(...) vlib_log(VLIB_LOG_LEVEL_WARNING, snat_main.log_class, __VA_ARGS__)

#define	nat_log_notice(...) vlib_log(VLIB_LOG_LEVEL_NOTICE, snat_main.log_class, __VA_ARGS__)

#define	nat_log_info(...) vlib_log(VLIB_LOG_LEVEL_INFO, snat_main.log_class, __VA_ARGS__)

#define	nat_log_debug(...) vlib_log(VLIB_LOG_LEVEL_DEBUG, snat_main.log_class, __VA_ARGS__)

Typedefs
typedef u32()	snat_icmp_match_function_t(struct snat_main_s sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)

typedef u32()	snat_get_worker_function_t(ip4_header_t *ip, u32 rx_fib_index)

typedef int()	nat_alloc_out_addr_and_port_function_t(snat_address_t addresses, u32 fib_index, u32 thread_index, snat_session_key_t k, u16 port_per_thread, u32 snat_thread_index)

typedef struct snat_main_s	snat_main_t

Enumerations
enum	nat_addr_and_port_alloc_alg_t { foreach_nat_addr_and_port_alloc_alg }

enum	snat_protocol_t { foreach_snat_protocol }

enum	snat_session_state_t { foreach_snat_session_state }

enum	twice_nat_type_t { TWICE_NAT_DISABLED, TWICE_NAT, TWICE_NAT_SELF }

enum	lb_nat_type_t { NO_LB_NAT, LB_NAT, AFFINITY_LB_NAT }

Functions
typedef	CLIB_PACKED (struct { snat_session_key_t out2in;snat_session_key_t in2out;u32 flags;u32 per_user_index;u32 per_user_list_head_index;f64 last_heard;u64 total_bytes;u32 total_pkts;ip4_address_t ext_host_addr;u16 ext_host_port;ip4_address_t ext_host_nat_addr;u16 ext_host_nat_port;u8 state;u32 i2o_fin_seq;u32 o2i_fin_seq;u32 user_index;}) snat_session_t

u32	icmp_match_in2out_fast (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation. More...

u32	icmp_match_in2out_slow (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation and create session if needed. More...

u32	icmp_match_out2in_fast (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation. More...

u32	icmp_match_out2in_slow (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation and create session if needed. More...

u32	icmp_match_out2in_det (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation and create session if needed. More...

u32	icmp_match_in2out_det (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)
	Get address and port values to be used for ICMP packet translation and create session if needed. More...

u32	icmp_match_out2in_ed (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)

u32	icmp_match_in2out_ed (snat_main_t sm, vlib_node_runtime_t node, u32 thread_index, vlib_buffer_t b0, ip4_header_t ip0, u8 p_proto, snat_session_key_t p_value, u8 p_dont_translate, void d, void *e)

u32	icmp_in2out (snat_main_t sm, vlib_buffer_t b0, ip4_header_t ip0, icmp46_header_t icmp0, u32 sw_if_index0, u32 rx_fib_index0, vlib_node_runtime_t node, u32 next0, u32 thread_index, void d, void *e)

u32	icmp_out2in (snat_main_t sm, vlib_buffer_t b0, ip4_header_t ip0, icmp46_header_t icmp0, u32 sw_if_index0, u32 rx_fib_index0, vlib_node_runtime_t node, u32 next0, u32 thread_index, void d, void *e)

u32	snat_icmp_hairpinning (snat_main_t sm, vlib_buffer_t b0, ip4_header_t ip0, icmp46_header_t icmp0, int is_ed)

void	nat_hairpinning_sm_unknown_proto (snat_main_t sm, vlib_buffer_t b, ip4_header_t *ip)

void	nat44_ed_hairpinning_unknown_proto (snat_main_t sm, vlib_buffer_t b, ip4_header_t *ip)

int	snat_hairpinning (snat_main_t sm, vlib_buffer_t b0, ip4_header_t ip0, udp_header_t udp0, tcp_header_t *tcp0, u32 proto0, int is_ed)

void	nat44_reass_hairpinning (snat_main_t sm, vlib_buffer_t b0, ip4_header_t *ip0, u16 sport, u16 dport, u32 proto0, int is_ed)

int	nat44_i2o_ed_is_idle_session_cb (clib_bihash_kv_16_8_t kv, void arg)

int	nat44_o2i_ed_is_idle_session_cb (clib_bihash_kv_16_8_t kv, void arg)

int	nat44_i2o_is_idle_session_cb (clib_bihash_kv_8_8_t kv, void arg)

int	nat44_o2i_is_idle_session_cb (clib_bihash_kv_8_8_t kv, void arg)

void	increment_v4_address (ip4_address_t *a)
	Increment IPv4 address. More...

int	snat_add_address (snat_main_t sm, ip4_address_t addr, u32 vrf_id, u8 twice_nat)
	Add external address to NAT44 pool. More...

int	snat_del_address (snat_main_t *sm, ip4_address_t addr, u8 delete_sm, u8 twice_nat)
	Delete external address from NAT44 pool. More...

void	nat44_add_del_address_dpo (ip4_address_t addr, u8 is_add)
	Add/delete external address to FIB DPO (out2in DPO mode) More...

int	snat_add_static_mapping (ip4_address_t l_addr, ip4_address_t e_addr, u16 l_port, u16 e_port, u32 vrf_id, int addr_only, u32 sw_if_index, snat_protocol_t proto, int is_add, twice_nat_type_t twice_nat, u8 out2in_only, u8 *tag, u8 identity_nat)
	Add/delete NAT44 static mapping. More...

int	nat44_add_del_lb_static_mapping (ip4_address_t e_addr, u16 e_port, snat_protocol_t proto, nat44_lb_addr_port_t locals, u8 is_add, twice_nat_type_t twice_nat, u8 out2in_only, u8 tag, u32 affinity)
	Add/delete static mapping with load-balancing (multiple backends) More...

int	nat44_lb_static_mapping_add_del_local (ip4_address_t e_addr, u16 e_port, ip4_address_t l_addr, u16 l_port, snat_protocol_t proto, u32 vrf_id, u8 probability, u8 is_add)

clib_error_t *	snat_api_init (vlib_main_t vm, snat_main_t sm)

int	snat_set_workers (uword *bitmap)
	Set NAT plugin workers. More...

int	snat_interface_add_del (u32 sw_if_index, u8 is_inside, int is_del)
	Enable/disable NAT44 feature on the interface. More...

int	snat_interface_add_del_output_feature (u32 sw_if_index, u8 is_inside, int is_del)
	Enable/disable NAT44 output feature on the interface (postrouting NAT) More...

int	snat_add_interface_address (snat_main_t *sm, u32 sw_if_index, int is_del, u8 twice_nat)
	Add/delete NAT44 pool address from specific interfce. More...

int	nat44_del_session (snat_main_t sm, ip4_address_t addr, u16 port, snat_protocol_t proto, u32 vrf_id, int is_in)
	Delete NAT44 session. More...

int	nat44_del_ed_session (snat_main_t sm, ip4_address_t addr, u16 port, ip4_address_t *eh_addr, u16 eh_port, u8 proto, u32 vrf_id, int is_in)
	Delete NAT44 endpoint-dependent session. More...

void	nat_free_session_data (snat_main_t sm, snat_session_t s, u32 thread_index)
	Free NAT44 session data (lookup keys, external addrres port) More...

snat_user_t *	nat_user_get_or_create (snat_main_t sm, ip4_address_t addr, u32 fib_index, u32 thread_index)
	Find or create NAT user. More...

snat_session_t *	nat_session_alloc_or_recycle (snat_main_t sm, snat_user_t u, u32 thread_index)
	Allocate new NAT session or recycle last used. More...

snat_session_t *	nat_ed_session_alloc (snat_main_t sm, snat_user_t u, u32 thread_index, f64 now)
	Allocate NAT endpoint-dependent session. More...

void	nat_set_alloc_addr_and_port_mape (u16 psid, u16 psid_offset, u16 psid_length)
	Set address and port assignment algorithm for MAP-E CE. More...

void	nat_set_alloc_addr_and_port_range (u16 start_port, u16 end_port)
	Set address and port assignment algorithm for port range. More...

void	nat_set_alloc_addr_and_port_default (void)
	Set address and port assignment algorithm to default/standard. More...

void	snat_free_outside_address_and_port (snat_address_t addresses, u32 thread_index, snat_session_key_t k)
	Free outside address and port pair. More...

int	snat_alloc_outside_address_and_port (snat_address_t addresses, u32 fib_index, u32 thread_index, snat_session_key_t k, u16 port_per_thread, u32 snat_thread_index)
	Alloc outside address and port. More...

int	snat_static_mapping_match (snat_main_t sm, snat_session_key_t match, snat_session_key_t mapping, u8 by_external, u8 is_addr_only, twice_nat_type_t twice_nat, lb_nat_type_t lb, ip4_address_t ext_host_addr, u8 *is_identity_nat)
	Match NAT44 static mapping. More...

void	snat_add_del_addr_to_fib (ip4_address_t *addr, u8 p_len, u32 sw_if_index, int is_add)
	Add/del NAT address to FIB. More...

Variables
snat_main_t	snat_main

vlib_node_registration_t	snat_in2out_node
	(constructor) VLIB_REGISTER_NODE (snat_in2out_node) More...

vlib_node_registration_t	snat_in2out_output_node
	(constructor) VLIB_REGISTER_NODE (snat_in2out_output_node) More...

vlib_node_registration_t	snat_out2in_node
	(constructor) VLIB_REGISTER_NODE (snat_out2in_node) More...

vlib_node_registration_t	snat_in2out_fast_node
	(constructor) VLIB_REGISTER_NODE (snat_in2out_fast_node) More...

vlib_node_registration_t	snat_out2in_fast_node
	(constructor) VLIB_REGISTER_NODE (snat_out2in_fast_node) More...

vlib_node_registration_t	snat_in2out_worker_handoff_node
	(constructor) VLIB_REGISTER_NODE (snat_in2out_worker_handoff_node) More...

vlib_node_registration_t	snat_in2out_output_worker_handoff_node
	(constructor) VLIB_REGISTER_NODE (snat_in2out_output_worker_handoff_node) More...

vlib_node_registration_t	snat_out2in_worker_handoff_node
	(constructor) VLIB_REGISTER_NODE (snat_out2in_worker_handoff_node) More...

vlib_node_registration_t	snat_det_in2out_node
	(constructor) VLIB_REGISTER_NODE (snat_det_in2out_node) More...

vlib_node_registration_t	snat_det_out2in_node
	(constructor) VLIB_REGISTER_NODE (snat_det_out2in_node) More...

vlib_node_registration_t	snat_hairpin_dst_node
	(constructor) VLIB_REGISTER_NODE (snat_hairpin_dst_node) More...

vlib_node_registration_t	snat_hairpin_src_node
	(constructor) VLIB_REGISTER_NODE (snat_hairpin_src_node) More...

vlib_node_registration_t	nat44_ed_in2out_node
	(constructor) VLIB_REGISTER_NODE (nat44_ed_in2out_node) More...

vlib_node_registration_t	nat44_ed_in2out_output_node
	(constructor) VLIB_REGISTER_NODE (nat44_ed_in2out_output_node) More...

vlib_node_registration_t	nat44_ed_out2in_node
	(constructor) VLIB_REGISTER_NODE (nat44_ed_out2in_node) More...

vlib_node_registration_t	nat44_ed_hairpin_dst_node
	(constructor) VLIB_REGISTER_NODE (nat44_ed_hairpin_dst_node) More...

vlib_node_registration_t	nat44_ed_hairpin_src_node
	(constructor) VLIB_REGISTER_NODE (nat44_ed_hairpin_src_node) More...

vlib_node_registration_t	nat44_ed_in2out_worker_handoff_node

vlib_node_registration_t	nat44_ed_in2out_output_worker_handoff_node

vlib_node_registration_t	nat44_ed_out2in_worker_handoff_node

format_function_t	format_snat_user

format_function_t	format_snat_static_mapping

format_function_t	format_snat_static_map_to_resolve

format_function_t	format_snat_session

format_function_t	format_det_map_ses

format_function_t	format_snat_key

format_function_t	format_static_mapping_key

format_function_t	format_snat_protocol

format_function_t	format_nat_addr_and_port_alloc_alg

format_function_t	format_nat44_reass_trace

unformat_function_t	unformat_snat_protocol

Macro Definition Documentation

◆ foreach_nat_addr_and_port_alloc_alg

#define foreach_nat_addr_and_port_alloc_alg

Value:

_(0, DEFAULT, "default")         \
  _(1, MAPE, "map-e")              \
  _(2, RANGE, "port-range")

Definition at line 114 of file nat.h.

◆ foreach_snat_protocol

#define foreach_snat_protocol

Value:

_(UDP, 0, udp, "udp")       \
  _(TCP, 1, tcp, "tcp")       \
  _(ICMP, 2, icmp, "icmp")

Definition at line 128 of file nat.h.

◆ foreach_snat_session_state

#define foreach_snat_session_state

Value:

_(0, UNKNOWN, "unknown")                 \
  _(1, UDP_ACTIVE, "udp-active")           \
  _(2, TCP_SYN_SENT, "tcp-syn-sent")       \
  _(3, TCP_ESTABLISHED, "tcp-established") \
  _(4, TCP_FIN_WAIT, "tcp-fin-wait")       \
  _(5, TCP_CLOSE_WAIT, "tcp-close-wait")   \
  _(6, TCP_CLOSING, "tcp-closing")         \
  _(7, TCP_LAST_ACK, "tcp-last-ack")       \
  _(8, TCP_CLOSED, "tcp-closed")           \
  _(9, ICMP_ACTIVE, "icmp-active")

Definition at line 142 of file nat.h.

◆ is_addr_only_static_mapping

#define is_addr_only_static_mapping ( sm ) (sm->flags & NAT_STATIC_MAPPING_FLAG_ADDR_ONLY)

Check if NAT static mapping is address only (1:1NAT).

Parameters

sm	NAT static mapping

Returns: 1 if 1:1NAT, 0 if 1:1NAPT

Definition at line 665 of file nat.h.

◆ is_affinity_sessions

#define is_affinity_sessions ( s ) (s->flags & SNAT_SESSION_FLAG_AFFINITY)

Check if NAT session has affinity record.

Parameters

s	NAT session

Returns: 1 if NAT session has affinity record

Definition at line 641 of file nat.h.

◆ is_ed_session

#define is_ed_session ( s ) (s->flags & SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT)

Check if NAT session is endpoint dependent.

Parameters

s	NAT session

Returns: 1 if NAT session is endpoint dependent

Definition at line 635 of file nat.h.

◆ is_fwd_bypass_session

#define is_fwd_bypass_session ( s ) (s->flags & SNAT_SESSION_FLAG_FWD_BYPASS)

Check if NAT session is forwarding bypass.

Parameters

s	NAT session

Returns: 1 if NAT session is load-balancing

Definition at line 629 of file nat.h.

◆ is_identity_static_mapping

#define is_identity_static_mapping ( sm ) (sm->flags & NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT)

Check if NAT static mapping is identity NAT.

Parameters

sm	NAT static mapping

Returns: 1 if identity NAT

Definition at line 677 of file nat.h.

◆ is_lb_session

#define is_lb_session ( s ) (s->flags & SNAT_SESSION_FLAG_LOAD_BALANCING)

Check if NAT session is load-balancing.

Parameters

s	NAT session

Returns: 1 if NAT session is load-balancing

Definition at line 623 of file nat.h.

◆ is_lb_static_mapping

#define is_lb_static_mapping ( sm ) (sm->flags & NAT_STATIC_MAPPING_FLAG_LB)

Check if NAT static mapping is load-balancing.

Parameters

sm	NAT static mapping

Returns: 1 if load-balancing

Definition at line 683 of file nat.h.

◆ is_out2in_only_static_mapping

#define is_out2in_only_static_mapping ( sm ) (sm->flags & NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY)

Check if NAT static mapping match only out2in direction.

Parameters

sm	NAT static mapping

Returns: 1 if rule match only out2in direction

Definition at line 671 of file nat.h.

◆ is_twice_nat_session

#define is_twice_nat_session ( s ) (s->flags & SNAT_SESSION_FLAG_TWICE_NAT)

Check if NAT session is twice NAT.

Parameters

s	NAT session

Returns: 1 if NAT session is twice NAT

Definition at line 617 of file nat.h.

◆ nat44_is_ses_closed

#define nat44_is_ses_closed ( s ) s->state == 0xf

Check if NAT44 endpoint-dependent TCP session is closed.

Parameters

s	NAT session

Returns: 1 if session is closed

Definition at line 659 of file nat.h.

◆ NAT44_SES_I2O_FIN

#define NAT44_SES_I2O_FIN 1

Definition at line 162 of file nat.h.

◆ NAT44_SES_I2O_FIN_ACK

#define NAT44_SES_I2O_FIN_ACK 4

Definition at line 164 of file nat.h.

◆ NAT44_SES_I2O_SYN

#define NAT44_SES_I2O_SYN 16

Definition at line 166 of file nat.h.

◆ NAT44_SES_O2I_FIN

#define NAT44_SES_O2I_FIN 2

Definition at line 163 of file nat.h.

◆ NAT44_SES_O2I_FIN_ACK

#define NAT44_SES_O2I_FIN_ACK 8

Definition at line 165 of file nat.h.

◆ NAT44_SES_O2I_SYN

#define NAT44_SES_O2I_SYN 32

Definition at line 167 of file nat.h.

◆ NAT44_SES_RST

#define NAT44_SES_RST 64

Definition at line 168 of file nat.h.

◆ NAT_FQ_NELTS

#define NAT_FQ_NELTS 64

Definition at line 40 of file nat.h.

◆ NAT_INTERFACE_FLAG_IS_INSIDE

#define NAT_INTERFACE_FLAG_IS_INSIDE 1

Definition at line 181 of file nat.h.

◆ NAT_INTERFACE_FLAG_IS_OUTSIDE

#define NAT_INTERFACE_FLAG_IS_OUTSIDE 2

Definition at line 182 of file nat.h.

◆ nat_interface_is_inside

#define nat_interface_is_inside ( i ) i->flags & NAT_INTERFACE_FLAG_IS_INSIDE

Check if NAT interface is inside.

Parameters

i	NAT interfce

Returns: 1 if inside interface

Definition at line 647 of file nat.h.

◆ nat_interface_is_outside

#define nat_interface_is_outside ( i ) i->flags & NAT_INTERFACE_FLAG_IS_OUTSIDE

Check if NAT interface is outside.

Parameters

i	NAT interfce

Returns: 1 if outside interface

Definition at line 653 of file nat.h.

◆ nat_log_debug

#define nat_log_debug ( ... ) vlib_log(VLIB_LOG_LEVEL_DEBUG, snat_main.log_class, __VA_ARGS__)

Definition at line 700 of file nat.h.

◆ nat_log_err

#define nat_log_err ( ... ) vlib_log(VLIB_LOG_LEVEL_ERR, snat_main.log_class, __VA_ARGS__)

Definition at line 692 of file nat.h.

◆ nat_log_info

#define nat_log_info ( ... ) vlib_log(VLIB_LOG_LEVEL_INFO, snat_main.log_class, __VA_ARGS__)

Definition at line 698 of file nat.h.

◆ nat_log_notice

#define nat_log_notice ( ... ) vlib_log(VLIB_LOG_LEVEL_NOTICE, snat_main.log_class, __VA_ARGS__)

Definition at line 696 of file nat.h.

◆ nat_log_warn

#define nat_log_warn ( ... ) vlib_log(VLIB_LOG_LEVEL_WARNING, snat_main.log_class, __VA_ARGS__)

Definition at line 694 of file nat.h.

◆ NAT_STATIC_MAPPING_FLAG_ADDR_ONLY

#define NAT_STATIC_MAPPING_FLAG_ADDR_ONLY 1

Definition at line 185 of file nat.h.

◆ NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT

#define NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT 4

Definition at line 187 of file nat.h.

◆ NAT_STATIC_MAPPING_FLAG_LB

#define NAT_STATIC_MAPPING_FLAG_LB 8

Definition at line 188 of file nat.h.

◆ NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY

#define NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY 2

Definition at line 186 of file nat.h.

◆ SNAT_FLAG_HAIRPINNING

#define SNAT_FLAG_HAIRPINNING (1 << 0)

Definition at line 43 of file nat.h.

◆ SNAT_ICMP_TIMEOUT

#define SNAT_ICMP_TIMEOUT 60

Definition at line 37 of file nat.h.

◆ snat_is_session_static

#define snat_is_session_static ( s ) (s->flags & SNAT_SESSION_FLAG_STATIC_MAPPING)

Check if SNAT session is created from static mapping.

Parameters

s	SNAT session

Returns: 1 if SNAT session is created from static mapping otherwise 0

Definition at line 605 of file nat.h.

◆ snat_is_unk_proto_session

#define snat_is_unk_proto_session ( s ) (s->flags & SNAT_SESSION_FLAG_UNKNOWN_PROTO)

Check if SNAT session for unknown protocol.

Parameters

s	SNAT session

Returns: 1 if SNAT session for unknown protocol otherwise 0

Definition at line 611 of file nat.h.

◆ SNAT_SESSION_FLAG_AFFINITY

#define SNAT_SESSION_FLAG_AFFINITY 64

Definition at line 177 of file nat.h.

◆ SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT

#define SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT 16

Definition at line 175 of file nat.h.

◆ SNAT_SESSION_FLAG_FWD_BYPASS

#define SNAT_SESSION_FLAG_FWD_BYPASS 32

Definition at line 176 of file nat.h.

◆ SNAT_SESSION_FLAG_LOAD_BALANCING

#define SNAT_SESSION_FLAG_LOAD_BALANCING 4

Definition at line 173 of file nat.h.

◆ SNAT_SESSION_FLAG_OUTPUT_FEATURE

#define SNAT_SESSION_FLAG_OUTPUT_FEATURE 128

Definition at line 178 of file nat.h.

◆ SNAT_SESSION_FLAG_STATIC_MAPPING

#define SNAT_SESSION_FLAG_STATIC_MAPPING 1

Definition at line 171 of file nat.h.

◆ SNAT_SESSION_FLAG_TWICE_NAT

#define SNAT_SESSION_FLAG_TWICE_NAT 8

Definition at line 174 of file nat.h.

◆ SNAT_SESSION_FLAG_UNKNOWN_PROTO

#define SNAT_SESSION_FLAG_UNKNOWN_PROTO 2

Definition at line 172 of file nat.h.

◆ SNAT_TCP_ESTABLISHED_TIMEOUT

#define SNAT_TCP_ESTABLISHED_TIMEOUT 7440

Definition at line 36 of file nat.h.

◆ SNAT_TCP_TRANSITORY_TIMEOUT

#define SNAT_TCP_TRANSITORY_TIMEOUT 240

Definition at line 35 of file nat.h.

◆ SNAT_UDP_TIMEOUT

#define SNAT_UDP_TIMEOUT 300

Definition at line 34 of file nat.h.

◆ tcp_is_init

#define tcp_is_init ( t ) ((t->flags & TCP_FLAG_SYN) && !(t->flags & TCP_FLAG_ACK))

Check if client initiating TCP connection (received SYN from client)

Parameters

t	TCP header

Returns: 1 if client initiating TCP connection

Definition at line 689 of file nat.h.

Typedef Documentation

◆ nat_alloc_out_addr_and_port_function_t

typedef int() nat_alloc_out_addr_and_port_function_t(snat_address_t *addresses, u32 fib_index, u32 thread_index, snat_session_key_t *k, u16 port_per_thread, u32 snat_thread_index)

Definition at line 422 of file nat.h.

◆ snat_get_worker_function_t

typedef u32() snat_get_worker_function_t(ip4_header_t *ip, u32 rx_fib_index)

Definition at line 418 of file nat.h.

◆ snat_icmp_match_function_t

typedef u32() snat_icmp_match_function_t(struct snat_main_s *sm, vlib_node_runtime_t *node, u32 thread_index, vlib_buffer_t *b0, ip4_header_t *ip0, u8 *p_proto, snat_session_key_t *p_value, u8 *p_dont_translate, void *d, void *e)

Definition at line 408 of file nat.h.

◆ snat_main_t

typedef struct snat_main_s snat_main_t

Enumeration Type Documentation

◆ lb_nat_type_t

enum lb_nat_type_t

Enumerator
NO_LB_NAT
LB_NAT
AFFINITY_LB_NAT

Definition at line 315 of file nat.h.

◆ nat_addr_and_port_alloc_alg_t

enum nat_addr_and_port_alloc_alg_t

Enumerator
foreach_nat_addr_and_port_alloc_alg

Definition at line 119 of file nat.h.

◆ snat_protocol_t

enum snat_protocol_t

Enumerator
foreach_snat_protocol

Definition at line 133 of file nat.h.

◆ snat_session_state_t

enum snat_session_state_t

Enumerator
foreach_snat_session_state

Definition at line 154 of file nat.h.

◆ twice_nat_type_t

enum twice_nat_type_t

Enumerator
TWICE_NAT_DISABLED
TWICE_NAT
TWICE_NAT_SELF

Definition at line 305 of file nat.h.

Function Documentation

◆ CLIB_PACKED()

typedef CLIB_PACKED ( struct { snat_session_key_t out2in;snat_session_key_t in2out;u32 flags;u32 per_user_index;u32 per_user_list_head_index;f64 last_heard;u64 total_bytes;u32 total_pkts;ip4_address_t ext_host_addr;u16 ext_host_port;ip4_address_t ext_host_nat_addr;u16 ext_host_nat_port;u8 state;u32 i2o_fin_seq;u32 o2i_fin_seq;u32 user_index;} )

◆ icmp_in2out()

u32 icmp_in2out	(	snat_main_t *	sm,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		icmp46_header_t *	icmp0,
		u32	sw_if_index0,
		u32	rx_fib_index0,
		vlib_node_runtime_t *	node,
		u32	next0,
		u32	thread_index,
		void *	d,
		void *	e
	)

Definition at line 635 of file in2out.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_in2out_det()

u32 icmp_match_in2out_det	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation and create session if needed.

Parameters

[in,out]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 96 of file nat_det_in2out.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_in2out_ed()

u32 icmp_match_in2out_ed	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Definition at line 589 of file in2out_ed.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_in2out_fast()

u32 icmp_match_in2out_fast	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation.

Parameters

[in]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 566 of file in2out.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_in2out_slow()

u32 icmp_match_in2out_slow	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation and create session if needed.

Parameters

[in,out]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 449 of file in2out.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_out2in_det()

u32 icmp_match_out2in_det	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation and create session if needed.

Parameters

[in,out]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 96 of file nat_det_out2in.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_out2in_ed()

u32 icmp_match_out2in_ed	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Definition at line 492 of file out2in_ed.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_out2in_fast()

u32 icmp_match_out2in_fast	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation.

Parameters

[in]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 441 of file out2in.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_match_out2in_slow()

u32 icmp_match_out2in_slow	(	snat_main_t *	sm,
		vlib_node_runtime_t *	node,
		u32	thread_index,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u8 *	p_proto,
		snat_session_key_t *	p_value,
		u8 *	p_dont_translate,
		void *	d,
		void *	e
	)

Get address and port values to be used for ICMP packet translation and create session if needed.

Parameters

[in,out]	sm	NAT main
[in,out]	node	NAT node runtime
[in]	thread_index	thread index
[in,out]	b0	buffer containing packet to be translated
[out]	p_proto	protocol used for matching
[out]	p_value	address and port after NAT translation
[out]	p_dont_translate	if packet should not be translated
	d	optional parameter
	e	optional parameter

Definition at line 313 of file out2in.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ icmp_out2in()

u32 icmp_out2in	(	snat_main_t *	sm,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		icmp46_header_t *	icmp0,
		u32	sw_if_index0,
		u32	rx_fib_index0,
		vlib_node_runtime_t *	node,
		u32	next0,
		u32	thread_index,
		void *	d,
		void *	e
	)

Definition at line 502 of file out2in.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ increment_v4_address()

void increment_v4_address ( ip4_address_t * a )

Increment IPv4 address.

Definition at line 600 of file nat.c.

Here is the caller graph for this function:

◆ nat44_add_del_address_dpo()

void nat44_add_del_address_dpo	(	ip4_address_t	addr,
		u8	is_add
	)

Add/delete external address to FIB DPO (out2in DPO mode)

Parameters

addr	IPv4 address
is_add	1 = add, 0 = delete

Returns: 0 on success, non-zero value otherwise

Definition at line 2631 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_add_del_lb_static_mapping()

int nat44_add_del_lb_static_mapping	(	ip4_address_t	e_addr,
		u16	e_port,
		snat_protocol_t	proto,
		nat44_lb_addr_port_t *	locals,
		u8	is_add,
		twice_nat_type_t	twice_nat,
		u8	out2in_only,
		u8 *	tag,
		u32	affinity
	)

Add/delete static mapping with load-balancing (multiple backends)

Parameters

e_addr	external IPv4 address
e_port	external port number
proto	L4 protocol
locals	list of local backends
is_add	1 = add, 0 = delete
twice_nat	twice-nat mode
out2in_only	if 1 rule match only out2in direction
tag	opaque string tag
affinity	0 = disabled, otherwise client IP affinity sticky time

Returns: 0 on success, non-zero value otherwise

Definition at line 1142 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_del_ed_session()

int nat44_del_ed_session	(	snat_main_t *	sm,
		ip4_address_t *	addr,
		u16	port,
		ip4_address_t *	eh_addr,
		u16	eh_port,
		u8	proto,
		u32	vrf_id,
		int	is_in
	)

Delete NAT44 endpoint-dependent session.

Parameters

addr	IPv4 address
port	L4 port number
proto	L4 protocol
vrf_id	VRF ID
is_in	1 = inside network addres and por pair, 0 = outside

Returns: 0 on success, non-zero value otherwise

Definition at line 3409 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_del_session()

int nat44_del_session	(	snat_main_t *	sm,
		ip4_address_t *	addr,
		u16	port,
		snat_protocol_t	proto,
		u32	vrf_id,
		int	is_in
	)

Delete NAT44 session.

Parameters

addr	IPv4 address
port	L4 port number
proto	L4 protocol
vrf_id	VRF ID
is_in	1 = inside network addres and por pair, 0 = outside

Returns: 0 on success, non-zero value otherwise

Definition at line 3366 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_ed_hairpinning_unknown_proto()

void nat44_ed_hairpinning_unknown_proto	(	snat_main_t *	sm,
		vlib_buffer_t *	b,
		ip4_header_t *	ip
	)

Definition at line 382 of file nat44_hairpinning.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_i2o_ed_is_idle_session_cb()

int nat44_i2o_ed_is_idle_session_cb	(	clib_bihash_kv_16_8_t *	kv,
		void *	arg
	)

Definition at line 158 of file in2out_ed.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_i2o_is_idle_session_cb()

int nat44_i2o_is_idle_session_cb	(	clib_bihash_kv_8_8_t *	kv,
		void *	arg
	)

Definition at line 202 of file in2out.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_lb_static_mapping_add_del_local()

int nat44_lb_static_mapping_add_del_local	(	ip4_address_t	e_addr,
		u16	e_port,
		ip4_address_t	l_addr,
		u16	l_port,
		snat_protocol_t	proto,
		u32	vrf_id,
		u8	probability,
		u8	is_add
	)

Definition at line 1418 of file nat.c.

Here is the caller graph for this function:

◆ nat44_o2i_ed_is_idle_session_cb()

int nat44_o2i_ed_is_idle_session_cb	(	clib_bihash_kv_16_8_t *	kv,
		void *	arg
	)

Definition at line 131 of file out2in_ed.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_o2i_is_idle_session_cb()

int nat44_o2i_is_idle_session_cb	(	clib_bihash_kv_8_8_t *	kv,
		void *	arg
	)

Definition at line 118 of file out2in.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat44_reass_hairpinning()

void nat44_reass_hairpinning	(	snat_main_t *	sm,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		u16	sport,
		u16	dport,
		u32	proto0,
		int	is_ed
	)

Definition at line 427 of file nat44_hairpinning.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_ed_session_alloc()

snat_session_t* nat_ed_session_alloc	(	snat_main_t *	sm,
		snat_user_t *	u,
		u32	thread_index,
		f64	now
	)

Allocate NAT endpoint-dependent session.

Parameters

u	NAT user
thread_index	thread index

Returns: session data structure on success otherwise zero value

Definition at line 411 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_free_session_data()

void nat_free_session_data	(	snat_main_t *	sm,
		snat_session_t *	s,
		u32	thread_index
	)

Free NAT44 session data (lookup keys, external addrres port)

Parameters

s	NAT session
thread_index	thread index

Definition at line 178 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_hairpinning_sm_unknown_proto()

void nat_hairpinning_sm_unknown_proto	(	snat_main_t *	sm,
		vlib_buffer_t *	b,
		ip4_header_t *	ip
	)

Definition at line 357 of file nat44_hairpinning.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_session_alloc_or_recycle()

snat_session_t* nat_session_alloc_or_recycle	(	snat_main_t *	sm,
		snat_user_t *	u,
		u32	thread_index
	)

Allocate new NAT session or recycle last used.

Parameters

u	NAT user
thread_index	thread index

Returns: session data structure on success otherwise zero value

Definition at line 338 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_set_alloc_addr_and_port_default()

void nat_set_alloc_addr_and_port_default ( void )

Set address and port assignment algorithm to default/standard.

Definition at line 3476 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_set_alloc_addr_and_port_mape()

void nat_set_alloc_addr_and_port_mape	(	u16	psid,
		u16	psid_offset,
		u16	psid_length
	)

Set address and port assignment algorithm for MAP-E CE.

Parameters

psid	Port Set Identifier value
psid_offset	number of offset bits
psid_length	length of PSID

Definition at line 3453 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_set_alloc_addr_and_port_range()

void nat_set_alloc_addr_and_port_range	(	u16	start_port,
		u16	end_port
	)

Set address and port assignment algorithm for port range.

Parameters

start_port	beginning of the port range
end_port	end of the port range

Definition at line 3465 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ nat_user_get_or_create()

snat_user_t* nat_user_get_or_create	(	snat_main_t *	sm,
		ip4_address_t *	addr,
		u32	fib_index,
		u32	thread_index
	)

Find or create NAT user.

Parameters

addr	IPv4 address
fib_index	FIB table index
thread_index	thread index

Returns: NAT user data structure on success otherwise zero value

Definition at line 291 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_add_address()

int snat_add_address	(	snat_main_t *	sm,
		ip4_address_t *	addr,
		u32	vrf_id,
		u8	twice_nat
	)

Add external address to NAT44 pool.

Parameters

addr	IPv4 address
vrf_id	VRF id of tenant, ~0 means independent of VRF
twice_nat	1 if twice NAT address

Returns: 0 on success, non-zero value otherwise

Definition at line 516 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_add_del_addr_to_fib()

void snat_add_del_addr_to_fib	(	ip4_address_t *	addr,
		u8	p_len,
		u32	sw_if_index,
		int	is_add
	)

Add/del NAT address to FIB.

Add the external NAT address to the FIB as receive entries. This ensures that VPP will reply to ARP for this address and we don't need to enable proxy ARP on the outside interface.

Parameters

addr	IPv4 address
plen	address prefix length
sw_if_index	software index of the outside interface
is_add	0 = delete, 1 = add.

Definition at line 488 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_add_interface_address()

int snat_add_interface_address	(	snat_main_t *	sm,
		u32	sw_if_index,
		int	is_del,
		u8	twice_nat
	)

Add/delete NAT44 pool address from specific interfce.

Parameters

sw_if_index	software index of the interface
is_del	1 = delete, 0 = add
twice_nat	1 = twice NAT address for extenal hosts

Returns: 0 on success, non-zero value otherwise

Definition at line 3298 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_add_static_mapping()

int snat_add_static_mapping	(	ip4_address_t	l_addr,
		ip4_address_t	e_addr,
		u16	l_port,
		u16	e_port,
		u32	vrf_id,
		int	addr_only,
		u32	sw_if_index,
		snat_protocol_t	proto,
		int	is_add,
		twice_nat_type_t	twice_nat,
		u8	out2in_only,
		u8 *	tag,
		u8	identity_nat
	)

Add/delete NAT44 static mapping.

Parameters

l_addr	local IPv4 address
e_addr	external IPv4 address
l_port	local port number
e_port	external port number
vrf_id	local VRF ID
addr_only	1 = 1:1NAT, 0 = 1:1NAPT
sw_if_index	use interface address as external IPv4 address
proto	L4 protocol
is_add	1 = add, 0 = delete
twice_nat	twice-nat mode
out2in_only	if 1 rule match only out2in direction
tag	opaque string tag
identity_nat	identity NAT

Returns: 0 on success, non-zero value otherwise

Definition at line 652 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_alloc_outside_address_and_port()

int snat_alloc_outside_address_and_port	(	snat_address_t *	addresses,
		u32	fib_index,
		u32	thread_index,
		snat_session_key_t *	k,
		u16	port_per_thread,
		u32	snat_thread_index
	)

Alloc outside address and port.

Parameters

addresses	vector of outside addresses
fib_index	FIB table index
thread_index	thread index
k	allocated address and port pair
port_per_thread	number of ports per threead
snat_thread_index	NAT thread index

Returns: 0 on success, non-zero value otherwise

Definition at line 2432 of file nat.c.

Here is the caller graph for this function:

◆ snat_api_init()

clib_error_t* snat_api_init	(	vlib_main_t *	vm,
		snat_main_t *	sm
	)

Definition at line 3295 of file nat_api.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_del_address()

int snat_del_address	(	snat_main_t *	sm,
		ip4_address_t	addr,
		u8	delete_sm,
		u8	twice_nat
	)

Delete external address from NAT44 pool.

Parameters

addr	IPv4 address
delete_sm	1 if delete static mapping using address
twice_nat	1 if twice NAT address

Returns: 0 on success, non-zero value otherwise

Definition at line 1601 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_free_outside_address_and_port()

void snat_free_outside_address_and_port	(	snat_address_t *	addresses,
		u32	thread_index,
		snat_session_key_t *	k
	)

Free outside address and port pair.

Parameters

addresses	vector of outside addresses
thread_index	thread index
k	adddress, port and protocol

Definition at line 2249 of file nat.c.

Here is the caller graph for this function:

◆ snat_hairpinning()

int snat_hairpinning	(	snat_main_t *	sm,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		udp_header_t *	udp0,
		tcp_header_t *	tcp0,
		u32	proto0,
		int	is_ed
	)

Definition at line 96 of file nat44_hairpinning.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_icmp_hairpinning()

u32 snat_icmp_hairpinning	(	snat_main_t *	sm,
		vlib_buffer_t *	b0,
		ip4_header_t *	ip0,
		icmp46_header_t *	icmp0,
		int	is_ed
	)

Definition at line 203 of file nat44_hairpinning.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_interface_add_del()

int snat_interface_add_del	(	u32	sw_if_index,
		u8	is_inside,
		int	is_del
	)

Enable/disable NAT44 feature on the interface.

Parameters

sw_if_index	software index of the interface
is_inside	1 = inside, 0 = outside
is_del	1 = delete, 0 = add

Returns: 0 on success, non-zero value otherwise

Definition at line 1715 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_interface_add_del_output_feature()

int snat_interface_add_del_output_feature	(	u32	sw_if_index,
		u8	is_inside,
		int	is_del
	)

Enable/disable NAT44 output feature on the interface (postrouting NAT)

Parameters

sw_if_index	software index of the interface
is_inside	1 = inside, 0 = outside
is_del	1 = delete, 0 = add

Returns: 0 on success, non-zero value otherwise

Definition at line 1964 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_set_workers()

int snat_set_workers ( uword * bitmap )

Set NAT plugin workers.

Parameters

bitmap NAT workers bitmap

Returns: 0 on success, non-zero value otherwise

Definition at line 2087 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

◆ snat_static_mapping_match()

int snat_static_mapping_match	(	snat_main_t *	sm,
		snat_session_key_t	match,
		snat_session_key_t *	mapping,
		u8	by_external,
		u8 *	is_addr_only,
		twice_nat_type_t *	twice_nat,
		lb_nat_type_t *	lb,
		ip4_address_t *	ext_host_addr,
		u8 *	is_identity_nat
	)

Match NAT44 static mapping.

Parameters

match	address and port to match
mapping	external/local address and port of the matched mapping
by_external	if 0 match by local address otherwise match by external address
is_addr_only	1 if matched mapping is address only
twice_nat	matched mapping is twice NAT type
lb	1 if matched mapping is load-balanced
ext_host_addr	external host address

Returns: 0 if match found otherwise 1.

Definition at line 2287 of file nat.c.

Here is the call graph for this function:

Here is the caller graph for this function:

Variable Documentation

◆ format_det_map_ses

format_function_t format_det_map_ses

Definition at line 592 of file nat.h.

◆ format_nat44_reass_trace

format_function_t format_nat44_reass_trace

Definition at line 597 of file nat.h.

◆ format_nat_addr_and_port_alloc_alg

format_function_t format_nat_addr_and_port_alloc_alg

Definition at line 596 of file nat.h.

◆ format_snat_key

format_function_t format_snat_key

Definition at line 593 of file nat.h.

◆ format_snat_protocol

format_function_t format_snat_protocol

Definition at line 595 of file nat.h.

◆ format_snat_session

format_function_t format_snat_session

Definition at line 591 of file nat.h.

◆ format_snat_static_map_to_resolve

format_function_t format_snat_static_map_to_resolve

Definition at line 590 of file nat.h.

◆ format_snat_static_mapping

format_function_t format_snat_static_mapping

Definition at line 589 of file nat.h.

◆ format_snat_user

format_function_t format_snat_user

Definition at line 588 of file nat.h.

◆ format_static_mapping_key

format_function_t format_static_mapping_key

Definition at line 594 of file nat.h.

◆ nat44_ed_hairpin_dst_node

vlib_node_registration_t nat44_ed_hairpin_dst_node

Initial value:

= {
  .function = nat44_ed_hairpin_dst_fn,
  .name = "nat44-ed-hairpin-dst",
  .vector_size = sizeof (u32),
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_hairpin_error_strings),
  .error_strings = nat44_hairpin_error_strings,
  .n_next_nodes = NAT_HAIRPIN_N_NEXT,
  .next_nodes = {
    [NAT_HAIRPIN_NEXT_DROP] = "error-drop",
    [NAT_HAIRPIN_NEXT_LOOKUP] = "ip4-lookup",
  },
}

(constructor) VLIB_REGISTER_NODE (nat44_ed_hairpin_dst_node)

Definition at line 781 of file nat44_hairpinning.c.

◆ nat44_ed_hairpin_src_node

vlib_node_registration_t nat44_ed_hairpin_src_node

Initial value:

= {
  .function = nat44_ed_hairpin_src_fn,
  .name = "nat44-ed-hairpin-src",
  .vector_size = sizeof (u32),
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_hairpin_error_strings),
  .error_strings = nat44_hairpin_error_strings,
  .n_next_nodes = SNAT_HAIRPIN_SRC_N_NEXT,
  .next_nodes = {
     [SNAT_HAIRPIN_SRC_NEXT_DROP] = "error-drop",
     [SNAT_HAIRPIN_SRC_NEXT_SNAT_IN2OUT] = "nat44-ed-in2out-output",
     [SNAT_HAIRPIN_SRC_NEXT_INTERFACE_OUTPUT] = "interface-output",
     [SNAT_HAIRPIN_SRC_NEXT_SNAT_IN2OUT_WH] = "nat44-in2out-output-worker-handoff",
  },
}

(constructor) VLIB_REGISTER_NODE (nat44_ed_hairpin_src_node)

Definition at line 912 of file nat44_hairpinning.c.

◆ nat44_ed_in2out_node

vlib_node_registration_t nat44_ed_in2out_node

(constructor) VLIB_REGISTER_NODE (nat44_ed_in2out_node)

Definition at line 84 of file in2out_ed.c.

◆ nat44_ed_in2out_output_node

vlib_node_registration_t nat44_ed_in2out_output_node

(constructor) VLIB_REGISTER_NODE (nat44_ed_in2out_output_node)

Definition at line 86 of file in2out_ed.c.

◆ nat44_ed_in2out_output_worker_handoff_node

vlib_node_registration_t nat44_ed_in2out_output_worker_handoff_node

◆ nat44_ed_in2out_worker_handoff_node

vlib_node_registration_t nat44_ed_in2out_worker_handoff_node

◆ nat44_ed_out2in_node

vlib_node_registration_t nat44_ed_out2in_node

Initial value:

= {
  .function = nat44_ed_out2in_fast_path_fn,
  .name = "nat44-ed-out2in",
  .vector_size = sizeof (u32),
  .format_trace = format_nat44_ed_out2in_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat_out2in_ed_error_strings),
  .error_strings = nat_out2in_ed_error_strings,
  .runtime_data_bytes = sizeof (snat_runtime_t),
  .n_next_nodes = NAT44_ED_OUT2IN_N_NEXT,
  .next_nodes = {
    [NAT44_ED_OUT2IN_NEXT_DROP] = "error-drop",
    [NAT44_ED_OUT2IN_NEXT_LOOKUP] = "ip4-lookup",
    [NAT44_ED_OUT2IN_NEXT_SLOW_PATH] = "nat44-ed-out2in-slowpath",
    [NAT44_ED_OUT2IN_NEXT_ICMP_ERROR] = "ip4-icmp-error",
    [NAT44_ED_OUT2IN_NEXT_IN2OUT] = "nat44-ed-in2out",
    [NAT44_ED_OUT2IN_NEXT_REASS] = "nat44-ed-out2in-reass",
  },
}

(constructor) VLIB_REGISTER_NODE (nat44_ed_out2in_node)

Definition at line 1555 of file out2in_ed.c.

◆ nat44_ed_out2in_worker_handoff_node

vlib_node_registration_t nat44_ed_out2in_worker_handoff_node

◆ snat_det_in2out_node

vlib_node_registration_t snat_det_in2out_node

Initial value:

= {
  .function = snat_det_in2out_node_fn,
  .name = "nat44-det-in2out",
  .vector_size = sizeof (u32),
  .format_trace = format_nat_det_in2out_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat_det_in2out_error_strings),
  .error_strings = nat_det_in2out_error_strings,
  .n_next_nodes = NAT_DET_IN2OUT_N_NEXT,
  
  .next_nodes = {
    [NAT_DET_IN2OUT_NEXT_DROP] = "error-drop",
    [NAT_DET_IN2OUT_NEXT_LOOKUP] = "ip4-lookup",
    [NAT_DET_IN2OUT_NEXT_ICMP_ERROR] = "ip4-icmp-error",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_det_in2out_node)

Definition at line 858 of file nat_det_in2out.c.

◆ snat_det_out2in_node

vlib_node_registration_t snat_det_out2in_node

Initial value:

= {
  .function = snat_det_out2in_node_fn,
  .name = "nat44-det-out2in",
  .vector_size = sizeof (u32),
  .format_trace = format_nat_det_out2in_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat_det_out2in_error_strings),
  .error_strings = nat_det_out2in_error_strings,
  .runtime_data_bytes = sizeof (snat_runtime_t),
  .n_next_nodes = NAT_DET_OUT2IN_N_NEXT,
  
  .next_nodes = {
    [NAT_DET_OUT2IN_NEXT_DROP] = "error-drop",
    [NAT_DET_OUT2IN_NEXT_LOOKUP] = "ip4-lookup",
    [NAT_DET_OUT2IN_NEXT_ICMP_ERROR] = "ip4-icmp-error",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_det_out2in_node)

Definition at line 690 of file nat_det_out2in.c.

◆ snat_hairpin_dst_node

vlib_node_registration_t snat_hairpin_dst_node

Initial value:

= {
  .function = snat_hairpin_dst_fn,
  .name = "nat44-hairpin-dst",
  .vector_size = sizeof (u32),
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_hairpin_error_strings),
  .error_strings = nat44_hairpin_error_strings,
  .n_next_nodes = NAT_HAIRPIN_N_NEXT,
  .next_nodes = {
    [NAT_HAIRPIN_NEXT_DROP] = "error-drop",
    [NAT_HAIRPIN_NEXT_LOOKUP] = "ip4-lookup",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_hairpin_dst_node)

Definition at line 756 of file nat44_hairpinning.c.

◆ snat_hairpin_src_node

vlib_node_registration_t snat_hairpin_src_node

Initial value:

= {
  .function = snat_hairpin_src_fn,
  .name = "nat44-hairpin-src",
  .vector_size = sizeof (u32),
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_hairpin_error_strings),
  .error_strings = nat44_hairpin_error_strings,
  .n_next_nodes = SNAT_HAIRPIN_SRC_N_NEXT,
  .next_nodes = {
     [SNAT_HAIRPIN_SRC_NEXT_DROP] = "error-drop",
     [SNAT_HAIRPIN_SRC_NEXT_SNAT_IN2OUT] = "nat44-in2out-output",
     [SNAT_HAIRPIN_SRC_NEXT_INTERFACE_OUTPUT] = "interface-output",
     [SNAT_HAIRPIN_SRC_NEXT_SNAT_IN2OUT_WH] = "nat44-in2out-output-worker-handoff",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_hairpin_src_node)

Definition at line 885 of file nat44_hairpinning.c.

◆ snat_in2out_fast_node

vlib_node_registration_t snat_in2out_fast_node

(constructor) VLIB_REGISTER_NODE (snat_in2out_fast_node)

Definition at line 77 of file in2out.c.

◆ snat_in2out_node

vlib_node_registration_t snat_in2out_node

(constructor) VLIB_REGISTER_NODE (snat_in2out_node)

Definition at line 75 of file in2out.c.

◆ snat_in2out_output_node

vlib_node_registration_t snat_in2out_output_node

(constructor) VLIB_REGISTER_NODE (snat_in2out_output_node)

Definition at line 78 of file in2out.c.

◆ snat_in2out_output_worker_handoff_node

vlib_node_registration_t snat_in2out_output_worker_handoff_node

Initial value:

= {
  .function = snat_in2out_output_worker_handoff_fn,
  .name = "nat44-in2out-output-worker-handoff",
  .vector_size = sizeof (u32),
  .format_trace = format_nat44_handoff_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_handoff_error_strings),
  .error_strings = nat44_handoff_error_strings,
  .n_next_nodes = 1,
  .next_nodes = {
    [0] = "error-drop",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_in2out_output_worker_handoff_node)

Definition at line 191 of file nat44_handoff.c.

◆ snat_in2out_worker_handoff_node

vlib_node_registration_t snat_in2out_worker_handoff_node

Initial value:

= {
  .function = snat_in2out_worker_handoff_fn,
  .name = "nat44-in2out-worker-handoff",
  .vector_size = sizeof (u32),
  .format_trace = format_nat44_handoff_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_handoff_error_strings),
  .error_strings = nat44_handoff_error_strings,
  .n_next_nodes = 1,
  .next_nodes = {
    [0] = "error-drop",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_in2out_worker_handoff_node)

Definition at line 164 of file nat44_handoff.c.

◆ snat_main

snat_main_t snat_main

Definition at line 38 of file nat.c.

◆ snat_out2in_fast_node

vlib_node_registration_t snat_out2in_fast_node

Initial value:

= {
  .function = snat_out2in_fast_node_fn,
  .name = "nat44-out2in-fast",
  .vector_size = sizeof (u32),
  .format_trace = format_snat_out2in_fast_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(snat_out2in_error_strings),
  .error_strings = snat_out2in_error_strings,
  .runtime_data_bytes = sizeof (snat_runtime_t),
  .n_next_nodes = SNAT_OUT2IN_N_NEXT,
  
  .next_nodes = {
    [SNAT_OUT2IN_NEXT_LOOKUP] = "ip4-lookup",
    [SNAT_OUT2IN_NEXT_DROP] = "error-drop",
    [SNAT_OUT2IN_NEXT_ICMP_ERROR] = "ip4-icmp-error",
    [SNAT_OUT2IN_NEXT_REASS] = "nat44-out2in-reass",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_out2in_fast_node)

Definition at line 1855 of file out2in.c.

◆ snat_out2in_node

vlib_node_registration_t snat_out2in_node

Initial value:

= {
  .function = snat_out2in_node_fn,
  .name = "nat44-out2in",
  .vector_size = sizeof (u32),
  .format_trace = format_snat_out2in_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(snat_out2in_error_strings),
  .error_strings = snat_out2in_error_strings,
  .runtime_data_bytes = sizeof (snat_runtime_t),
  .n_next_nodes = SNAT_OUT2IN_N_NEXT,
  
  .next_nodes = {
    [SNAT_OUT2IN_NEXT_DROP] = "error-drop",
    [SNAT_OUT2IN_NEXT_LOOKUP] = "ip4-lookup",
    [SNAT_OUT2IN_NEXT_ICMP_ERROR] = "ip4-icmp-error",
    [SNAT_OUT2IN_NEXT_REASS] = "nat44-out2in-reass",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_out2in_node)

Definition at line 1325 of file out2in.c.

◆ snat_out2in_worker_handoff_node

vlib_node_registration_t snat_out2in_worker_handoff_node

Initial value:

= {
  .function = snat_out2in_worker_handoff_fn,
  .name = "nat44-out2in-worker-handoff",
  .vector_size = sizeof (u32),
  .format_trace = format_nat44_handoff_trace,
  .type = VLIB_NODE_TYPE_INTERNAL,
  .n_errors = ARRAY_LEN(nat44_handoff_error_strings),
  .error_strings = nat44_handoff_error_strings,
  .n_next_nodes = 1,
  .next_nodes = {
    [0] = "error-drop",
  },
}

(constructor) VLIB_REGISTER_NODE (snat_out2in_worker_handoff_node)

Definition at line 218 of file nat44_handoff.c.

◆ unformat_snat_protocol

unformat_function_t unformat_snat_protocol

Definition at line 599 of file nat.h.

Data Structures

Macros

Typedefs

Enumerations

Functions

Variables

Macro Definition Documentation

◆ foreach_nat_addr_and_port_alloc_alg

◆ foreach_snat_protocol

◆ foreach_snat_session_state

◆ is_addr_only_static_mapping

◆ is_affinity_sessions

◆ is_ed_session

◆ is_fwd_bypass_session

◆ is_identity_static_mapping

◆ is_lb_session

◆ is_lb_static_mapping

◆ is_out2in_only_static_mapping

◆ is_twice_nat_session

◆ nat44_is_ses_closed

◆ NAT44_SES_I2O_FIN

◆ NAT44_SES_I2O_FIN_ACK

◆ NAT44_SES_I2O_SYN

◆ NAT44_SES_O2I_FIN

◆ NAT44_SES_O2I_FIN_ACK

◆ NAT44_SES_O2I_SYN

◆ NAT44_SES_RST

◆ NAT_FQ_NELTS

◆ NAT_INTERFACE_FLAG_IS_INSIDE

◆ NAT_INTERFACE_FLAG_IS_OUTSIDE

◆ nat_interface_is_inside

◆ nat_interface_is_outside

◆ nat_log_debug

◆ nat_log_err

◆ nat_log_info

◆ nat_log_notice

◆ nat_log_warn

◆ NAT_STATIC_MAPPING_FLAG_ADDR_ONLY

◆ NAT_STATIC_MAPPING_FLAG_IDENTITY_NAT

◆ NAT_STATIC_MAPPING_FLAG_LB

◆ NAT_STATIC_MAPPING_FLAG_OUT2IN_ONLY

◆ SNAT_FLAG_HAIRPINNING

◆ SNAT_ICMP_TIMEOUT

◆ snat_is_session_static

◆ snat_is_unk_proto_session

◆ SNAT_SESSION_FLAG_AFFINITY

◆ SNAT_SESSION_FLAG_ENDPOINT_DEPENDENT

◆ SNAT_SESSION_FLAG_FWD_BYPASS

◆ SNAT_SESSION_FLAG_LOAD_BALANCING

◆ SNAT_SESSION_FLAG_OUTPUT_FEATURE

◆ SNAT_SESSION_FLAG_STATIC_MAPPING

◆ SNAT_SESSION_FLAG_TWICE_NAT

◆ SNAT_SESSION_FLAG_UNKNOWN_PROTO

◆ SNAT_TCP_ESTABLISHED_TIMEOUT

◆ SNAT_TCP_TRANSITORY_TIMEOUT

◆ SNAT_UDP_TIMEOUT

◆ tcp_is_init

Typedef Documentation

◆ nat_alloc_out_addr_and_port_function_t

◆ snat_get_worker_function_t

◆ snat_icmp_match_function_t

◆ snat_main_t

Enumeration Type Documentation

◆ lb_nat_type_t

◆ nat_addr_and_port_alloc_alg_t

◆ snat_protocol_t

◆ snat_session_state_t

◆ twice_nat_type_t

Function Documentation

◆ CLIB_PACKED()

◆ icmp_in2out()

◆ icmp_match_in2out_det()

◆ icmp_match_in2out_ed()

◆ icmp_match_in2out_fast()

◆ icmp_match_in2out_slow()

◆ icmp_match_out2in_det()

◆ icmp_match_out2in_ed()

◆ icmp_match_out2in_fast()

◆ icmp_match_out2in_slow()

◆ icmp_out2in()