nat64.api

Go to the documentation of this file.

/*
 * Copyright (c) 2020 Cisco and/or its affiliates.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

option version = "1.0.0";
import "vnet/ip/ip_types.api";
import "vnet/interface_types.api";
import "plugins/nat/nat_types.api";

/**
 * @file nat64.api
 * @brief VPP control-plane API messages.
 *
 * This file defines VPP control-plane API messages which are generally
 * called through a shared memory interface.
 */

/** \brief Enable/disable NAT64 plugin
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param bib_buckets - Number of BIB hash buckets
    @param bib_memory_size - Memory size of BIB hash
    @param st_buckets - Number of session table hash buckets
    @param st_memory_size - Memory size of session table hash
    @param enable - true if enable, false if disable
*/
autoreply define nat64_plugin_enable_disable {
  u32 client_index;
  u32 context;
  u32 bib_buckets;
  u32 bib_memory_size;
  u32 st_buckets;
  u32 st_memory_size;
  bool enable;
  option status="in_progress";
};

/** \brief Set values of timeouts for NAT64 sessions (seconds)
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param udp - UDP timeout (default 300sec)
    @param tcp_established - TCP established timeout (default 7440sec)
    @param tcp_transitory - TCP transitory timeout (default 240sec)
    @param icmp - ICMP timeout (default 60sec)
*/
autoreply define nat64_set_timeouts {
  u32 client_index;
  u32 context;
  u32 udp;
  u32 tcp_established;
  u32 tcp_transitory;
  u32 icmp;
};

/** \brief Get values of timeouts for NAT64 sessions (seconds)
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
*/
define nat64_get_timeouts {
  u32 client_index;
  u32 context;
};

/** \brief Get values of timeouts for NAT64 sessions reply
    @param context - sender context, to match reply w/ request
    @param retval - return code
    @param udp - UDP timeout
    @param tcp_established - TCP established timeout
    @param tcp_transitory - TCP transitory timeout
    @param icmp - ICMP timeout
*/
define nat64_get_timeouts_reply {
  u32 context;
  i32 retval;
  u32 udp;
  u32 tcp_established;
  u32 tcp_transitory;
  u32 icmp;
};

/** \brief Add/delete address range to NAT64 pool
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param start_addr - start IPv4 address of the range
    @param end_addr - end IPv4 address of the range
    @param vrf_id - VRF id of tenant, ~0 means independent of VRF
    @param is_add - true if add, false if delete
*/
autoreply define nat64_add_del_pool_addr_range {
  u32 client_index;
  u32 context;
  vl_api_ip4_address_t start_addr;
  vl_api_ip4_address_t end_addr;
  u32 vrf_id;
  bool is_add;
};

/** \brief Dump NAT64 pool addresses
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
*/
define nat64_pool_addr_dump {
  u32 client_index;
  u32 context;
};

/** \brief NAT64 pool address details response
    @param context - sender context, to match reply w/ request
    @param address - IPv4 address
    @param vfr_id - VRF id of tenant, ~0 means independent of VRF
*/
define nat64_pool_addr_details {
  u32 context;
  vl_api_ip4_address_t address;
  u32 vrf_id;
};

/** \brief Enable/disable NAT64 feature on the interface
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param is_add - true if add, false if delete
    @param flags - flag NAT_IS_INSIDE if interface is inside else
                   interface is outside
    @param sw_if_index - index of the interface
*/
autoreply define nat64_add_del_interface {
  u32 client_index;
  u32 context;
  bool is_add;
  vl_api_nat_config_flags_t flags;
  vl_api_interface_index_t sw_if_index;
};

/** \brief Dump interfaces with NAT64 feature
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
*/
define nat64_interface_dump {
  u32 client_index;
  u32 context;
};

/** \brief NAT64 interface details response
    @param context - sender context, to match reply w/ request
    @param flags - flag NAT_IS_INSIDE if interface is inside,
                   flag NAT_IS_OUTSIDE if interface is outside
                   and if both flags are set the interface is
                   both inside and outside
    @param sw_if_index - index of the interface
*/
define nat64_interface_details {
  u32 context;
  vl_api_nat_config_flags_t flags;
  vl_api_interface_index_t sw_if_index;
};

/** \brief Add/delete NAT64 static BIB entry
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param i_addr - inside IPv6 address
    @param o_addr - outside IPv4 address
    @param i_port - inside port number
    @param o_port - outside port number
    @param vrf_id - VRF id of tenant
    @param proto - protocol number
    @param is_add - true if add, false if delete
*/
 autoreply define nat64_add_del_static_bib {
  u32 client_index;
  u32 context;
  vl_api_ip6_address_t i_addr;
  vl_api_ip4_address_t o_addr;
  u16 i_port;
  u16 o_port;
  u32 vrf_id;
  u8 proto;
  bool is_add;
};

/** \brief Dump NAT64 BIB
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param proto - protocol of the BIB: 255 - all BIBs
                                        6 - TCP BIB
                                        17 - UDP BIB
                                        1/58 - ICMP BIB
                                        otherwise - "unknown" protocol BIB
*/
define nat64_bib_dump {
  u32 client_index;
  u32 context;
  u8 proto;
};

/** \brief NAT64 BIB details response
    @param context - sender context, to match reply w/ request
    @param i_addr - inside IPv6 address
    @param o_addr - outside IPv4 address
    @param i_port - inside port number
    @param o_port - outside port number
    @param vrf_id - VRF id of tenant
    @param proto - protocol number
    @param flags - flag NAT_IS_STATIC if BIB entry is static 
                   or BIB entry is dynamic
    @param ses_num - number of sessions associated with the BIB entry
*/
define nat64_bib_details {
  u32 context;
  vl_api_ip6_address_t i_addr;
  vl_api_ip4_address_t o_addr;
  u16 i_port;
  u16 o_port;
  u32 vrf_id;
  u8 proto;
  vl_api_nat_config_flags_t flags;
  u32 ses_num;
};

/** \brief Dump NAT64 session table
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param proto - protocol of the session table: 255 - all STs
                                                  6 - TCP ST
                                                  17 - UDP ST
                                                  1/58 - ICMP ST
                                                  otherwise - "unknown" proto ST
*/
define nat64_st_dump {
  u32 client_index;
  u32 context;
  u8 proto;
};

/** \brief NAT64 session table details response
    @param context - sender context, to match reply w/ request
    @param il_addr - inside IPv6 address of the local host
    @param ol_addr - outside IPv4 address of the local host
    @param il_port - inside port number id of the local host/inside ICMP id
    @param ol_port - outside port number of the local host/outside ICMP id
    @param ir_addr - inside IPv6 address of the remote host
    @param or_addr - outside IPv4 address of the remote host
    @param r_port - port number of the remote host (not used for ICMP)
    @param vrf_id - VRF id of tenant
    @param proto - protocol number
*/
define nat64_st_details {
  u32 context;
  vl_api_ip6_address_t il_addr;
  vl_api_ip4_address_t ol_addr;
  u16 il_port;
  u16 ol_port;
  vl_api_ip6_address_t ir_addr;
  vl_api_ip4_address_t or_addr;
  u16 r_port;
  u32 vrf_id;
  u8 proto;
};

/** \brief Add/del NAT64 prefix
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param prefix - NAT64 prefix
    @param vrf_id - VRF id of tenant
    @param is_add - true if add, false if delete
*/
autoreply define nat64_add_del_prefix {
  u32 client_index;
  u32 context;
  vl_api_ip6_prefix_t prefix;
  u32 vrf_id;
  bool is_add;
};

/** \brief Dump NAT64 prefix
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
*/
define nat64_prefix_dump {
  u32 client_index;
  u32 context;
};

/** \brief Dump NAT64 prefix details response
    @param context - sender context, to match reply w/ request
    @param prefix - NAT64 prefix
    @param vrf_id - VRF id of tenant
*/
define nat64_prefix_details {
  u32 context;
  vl_api_ip6_prefix_t prefix;
  u32 vrf_id;
};

/** \brief Add/delete NAT64 pool address from specific interfce
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param is_add - true if add, false if delete
    @param sw_if_index - software index of the interface
*/
autoreply define nat64_add_del_interface_addr {
  u32 client_index;
  u32 context;
  bool is_add;
  vl_api_interface_index_t sw_if_index;
};