nsh.api

Go to the documentation of this file.

option version = "1.0.0";
 
import "vnet/interface_types.api";
 
/** \brief /** \brief Set or delete an NSH header entry keyed by NSP/NSI
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param is_add - add address if non-zero, else delete
    @param nsp_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI 
    @param md_type - metadata type [1|2] - only MDType1 supported today
    @param ver_o_c - version, O-bit and C-bit (see nsh_packet.h)
    @param ttl - indicates the maximum SFF hops for an SFP
    @param length - header length in n x 32bits, should be 6 for MDtype1
    @param next_protocol - next protocol encapsulated behind NSH header: 1=Ethernet, 2=IP4, 3=IP6
    @param c1 - 32bit Metadata type1 field (context1)
    @param c2 - 32bit Metadata type1 field (context2)
    @param c3 - 32bit Metadata type1 field (context3)
    @param c4 - 32bit Metadata type1 field (context4)
    @param tlvs - Metadata Type 2 only, Type Length Value metadata.
*/
define nsh_add_del_entry {
    u32 client_index;
    u32 context;
    bool is_add;
    u32 nsp_nsi;
    u8 md_type;
    u8 ver_o_c;
    u8 ttl;
    u8 length;
    u8 next_protocol;
    u32 c1;
    u32 c2;
    u32 c3;
    u32 c4;
    u8 tlv_length;
    u8 tlv[248];
};
 
/** \brief Reply from adding NSH entry (nsh_add_del_entry)
    @param context - sender context, to match reply w/ request
    @param retval - 0 means all ok
*/
define nsh_add_del_entry_reply {
    u32 context;
    i32 retval;
    u32 entry_index;
};
 
 
define nsh_entry_dump {
    u32 client_index;
    u32 context;
    u32 entry_index;
};
 
define nsh_entry_details {
    u32 context;
    u32 entry_index;
    u32 nsp_nsi;
    u8 md_type;
    u8 ver_o_c;
    u8 ttl;
    u8 length;
    u8 next_protocol;
    u32 c1;
    u32 c2;
    u32 c3;
    u32 c4;
    u8 tlv_length;
    u8 tlv[248];
};
 
/** \brief Set or delete a mapping from one NSH header to another and its egress (decap to inner packet, encap NSH with outer header)
    @param client_index - opaque cookie to identify the sender
    @param context - sender context, to match reply w/ request
    @param is_add - add address if non-zero, else delete
    @param nsh_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI
    @param mapped_nsp_nsi - Key for nsh_header_t entry to map to. : 24bit NSP 8bit NSI this may be ~0
       if next action is to decap to NSH next protocol
       Note the following heuristic:
            - if nsp_nsi == mapped_nsp_nsi then use-case is like SFC SFF
            - if nsp_nsi != mapped_nsp_nsi then use-case is like SFC SF
       Note: these are heuristics. Rules about NSI decrement are out of scope
    @param sw_if_index - index number of outer encap for NSH egress
    @param next_node - explicitly which node to send to
      Note the above parameters are instantiated by "encap-gre-intf <x>" means sw_if_index x, next_node gre-input
*/
define nsh_add_del_map {
    u32 client_index;
    u32 context;
    bool is_add;
    u32 nsp_nsi;
    u32 mapped_nsp_nsi;
    u32 nsh_action;
    vl_api_interface_index_t sw_if_index;
    vl_api_interface_index_t rx_sw_if_index;
    u32 next_node;
};
 
/** \brief Reply from adding NSH map (nsh_add_del_map)
    @param context - sender context, to match reply w/ request
    @param retval - 0 means all ok
*/
define nsh_add_del_map_reply {
    u32 context;
    i32 retval;
    u32 map_index;
};
 
define nsh_map_dump {
    u32 client_index;
    u32 context;
    u32 map_index;
};
 
define nsh_map_details {
    u32 context;
    u32 map_index;
    u32 nsp_nsi;
    u32 mapped_nsp_nsi;
    u32 nsh_action;
    vl_api_interface_index_t sw_if_index;
    vl_api_interface_index_t rx_sw_if_index;
    u32 next_node;
};