nat44_ed_cli.c

Go to the documentation of this file.

/*
 * Copyright (c) 2018 Cisco and/or its affiliates.
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at:
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */
/**
 * @file
 * @brief NAT44 CLI
 */
 
#include <vnet/fib/fib_table.h>
 
#include <nat/lib/log.h>
#include <nat/lib/nat_inlines.h>
#include <nat/lib/ipfix_logging.h>
 
#include <nat/nat44-ed/nat44_ed.h>
#include <nat/nat44-ed/nat44_ed_inlines.h>
#include <nat/nat44-ed/nat44_ed_affinity.h>
 
#define NAT44_ED_EXPECTED_ARGUMENT "expected required argument(s)"
 
static clib_error_t *
nat44_ed_enable_disable_command_fn (vlib_main_t *vm, unformat_input_t *input,
                                    vlib_cli_command_t *cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
 
  nat44_config_t c = { 0 };
  u8 enable_set = 0, enable = 0, mode_set = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (!mode_set && unformat (line_input, "static-mapping-only"))
        {
          mode_set = 1;
          c.static_mapping_only = 1;
          if (unformat (line_input, "connection-tracking"))
            {
              c.connection_tracking = 1;
            }
        }
      else if (unformat (line_input, "inside-vrf %u", &c.inside_vrf));
      else if (unformat (line_input, "outside-vrf %u", &c.outside_vrf));
      else if (unformat (line_input, "sessions %u", &c.sessions));
      else if (!enable_set)
        {
          enable_set = 1;
          if (unformat (line_input, "disable"))
            ;
          else if (unformat (line_input, "enable"))
            enable = 1;
        }
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (!enable_set)
    {
      error = clib_error_return (0, "expected enable | disable");
      goto done;
    }
 
  if (enable)
    {
      if (sm->enabled)
        {
          error = clib_error_return (0, "already enabled");
          goto done;
        }
 
      if (nat44_plugin_enable (c) != 0)
        error = clib_error_return (0, "enable failed");
    }
  else
    {
      if (!sm->enabled)
        {
          error = clib_error_return (0, "already disabled");
          goto done;
        }
 
      if (nat44_plugin_disable () != 0)
        error = clib_error_return (0, "disable failed");
    }
 
done:
  unformat_free (line_input);
  return error;
}
 
static clib_error_t *
set_workers_command_fn (vlib_main_t * vm,
                        unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  uword *bitmap = 0;
  int rv = 0;
  clib_error_t *error = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_bitmap_list, &bitmap))
        ;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (bitmap == 0)
    {
      error = clib_error_return (0, "List of workers must be specified.");
      goto done;
    }
 
  rv = snat_set_workers (bitmap);
 
  clib_bitmap_free (bitmap);
 
  switch (rv)
    {
    case VNET_API_ERROR_INVALID_WORKER:
      error = clib_error_return (0, "Invalid worker(s).");
      goto done;
    case VNET_API_ERROR_FEATURE_DISABLED:
      error = clib_error_return (0,
                                 "Supported only if 2 or more workes available.");
      goto done;
    default:
      break;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat_show_workers_commnad_fn (vlib_main_t * vm, unformat_input_t * input,
                             vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  u32 *worker;
 
  if (sm->num_workers > 1)
    {
      vlib_cli_output (vm, "%d workers", vec_len (sm->workers));
      vec_foreach (worker, sm->workers)
        {
          vlib_worker_thread_t *w =
            vlib_worker_threads + *worker + sm->first_worker_index;
          vlib_cli_output (vm, "  %s", w->name);
        }
    }
 
  return 0;
}
 
static clib_error_t *
snat_set_log_level_command_fn (vlib_main_t * vm,
                               unformat_input_t * input,
                               vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  u8 log_level = NAT_LOG_NONE;
  clib_error_t *error = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  if (!unformat (line_input, "%d", &log_level))
    {
      error = clib_error_return (0, "unknown input '%U'",
                                 format_unformat_error, line_input);
      goto done;
    }
  if (log_level > NAT_LOG_DEBUG)
    {
      error = clib_error_return (0, "unknown logging level '%d'", log_level);
      goto done;
    }
  sm->log_level = log_level;
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
snat_ipfix_logging_enable_disable_command_fn (vlib_main_t * vm,
                                              unformat_input_t * input,
                                              vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
 
  u32 domain_id = 0, src_port = 0;
  u8 enable_set = 0, enable = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "domain %d", &domain_id))
        ;
      else if (unformat (line_input, "src-port %d", &src_port))
        ;
      else if (!enable_set)
        {
          enable_set = 1;
          if (unformat (line_input, "disable"))
            ;
          else if (unformat (line_input, "enable"))
            enable = 1;
        }
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (!enable_set)
    {
      error = clib_error_return (0, "expected enable | disable");
      goto done;
    }
 
  if (nat_ipfix_logging_enable_disable (enable, domain_id, (u16) src_port))
    {
      error = clib_error_return (0, "ipfix logging enable failed");
      goto done;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat44_show_hash_command_fn (vlib_main_t * vm, unformat_input_t * input,
                            vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  nat_affinity_main_t *nam = &nat_affinity_main;
  int i;
  int verbose = 0;
 
  if (unformat (input, "detail"))
    verbose = 1;
  else if (unformat (input, "verbose"))
    verbose = 2;
 
  vlib_cli_output (vm, "%U", format_bihash_8_8, &sm->static_mapping_by_local,
                   verbose);
  vlib_cli_output (vm, "%U",
                   format_bihash_8_8, &sm->static_mapping_by_external,
                   verbose);
      vlib_cli_output (vm, "%U", format_bihash_16_8, &sm->flow_hash, verbose);
  vec_foreach_index (i, sm->per_thread_data)
  {
    vlib_cli_output (vm, "-------- thread %d %s --------\n",
                     i, vlib_worker_threads[i].name);
    vlib_cli_output (vm, "%U", format_bihash_16_8, &sm->flow_hash, verbose);
  }
 
      vlib_cli_output (vm, "%U", format_bihash_16_8, &nam->affinity_hash,
                       verbose);
 
  vlib_cli_output (vm, "-------- hash table parameters --------\n");
  vlib_cli_output (vm, "translation buckets: %u", sm->translation_buckets);
  return 0;
}
 
static clib_error_t *
nat_set_mss_clamping_command_fn (vlib_main_t * vm, unformat_input_t * input,
                                 vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  clib_error_t *error = 0;
  u32 mss;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "disable"))
        sm->mss_clamping = 0;
      else if (unformat (line_input, "%d", &mss))
        sm->mss_clamping = (u16) mss;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat_show_mss_clamping_command_fn (vlib_main_t * vm, unformat_input_t * input,
                                  vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
 
  if (sm->mss_clamping)
    vlib_cli_output (vm, "mss-clamping %d", sm->mss_clamping);
  else
    vlib_cli_output (vm, "mss-clamping disabled");
 
  return 0;
}
 
static clib_error_t *
add_address_command_fn (vlib_main_t * vm,
                        unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  snat_main_t *sm = &snat_main;
  ip4_address_t start_addr, end_addr, this_addr;
  u32 start_host_order, end_host_order;
  u32 vrf_id = ~0;
  int i, count;
  int is_add = 1;
  int rv = 0;
  clib_error_t *error = 0;
  u8 twice_nat = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U - %U",
                    unformat_ip4_address, &start_addr,
                    unformat_ip4_address, &end_addr))
        ;
      else if (unformat (line_input, "tenant-vrf %u", &vrf_id))
        ;
      else if (unformat (line_input, "%U", unformat_ip4_address, &start_addr))
        end_addr = start_addr;
      else if (unformat (line_input, "twice-nat"))
        twice_nat = 1;
      else if (unformat (line_input, "del"))
        is_add = 0;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (sm->static_mapping_only)
    {
      error = clib_error_return (0, "static mapping only mode");
      goto done;
    }
 
  start_host_order = clib_host_to_net_u32 (start_addr.as_u32);
  end_host_order = clib_host_to_net_u32 (end_addr.as_u32);
 
  if (end_host_order < start_host_order)
    {
      error = clib_error_return (0, "end address less than start address");
      goto done;
    }
 
  count = (end_host_order - start_host_order) + 1;
 
  if (count > 1024)
    nat_log_info ("%U - %U, %d addresses...",
                  format_ip4_address, &start_addr,
                  format_ip4_address, &end_addr, count);
 
  this_addr = start_addr;
 
  for (i = 0; i < count; i++)
    {
      if (is_add)
        rv = snat_add_address (sm, &this_addr, vrf_id, twice_nat);
      else
        rv = snat_del_address (sm, this_addr, 0, twice_nat);
 
      switch (rv)
        {
        case VNET_API_ERROR_VALUE_EXIST:
          error = clib_error_return (0, "NAT address already in use.");
          goto done;
        case VNET_API_ERROR_NO_SUCH_ENTRY:
          error = clib_error_return (0, "NAT address not exist.");
          goto done;
        case VNET_API_ERROR_UNSPECIFIED:
          error =
            clib_error_return (0, "NAT address used in static mapping.");
          goto done;
        default:
          break;
        }
 
      increment_v4_address (&this_addr);
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static void
nat44_show_lru_summary (vlib_main_t * vm, snat_main_per_thread_data_t * tsm,
                        u64 now, u64 sess_timeout_time)
{
  snat_main_t *sm = &snat_main;
  dlist_elt_t *oldest_elt;
  snat_session_t *s;
  u32 oldest_index;
 
  if (tsm->lru_pool)
    {
#define _(n, d)                                                               \
  oldest_index =                                                              \
    clib_dlist_remove_head (tsm->lru_pool, tsm->n##_lru_head_index);          \
  if (~0 != oldest_index)                                                     \
    {                                                                         \
      oldest_elt = pool_elt_at_index (tsm->lru_pool, oldest_index);           \
      s = pool_elt_at_index (tsm->sessions, oldest_elt->value);               \
      sess_timeout_time =                                                     \
        s->last_heard + (f64) nat44_session_get_timeout (sm, s);              \
      vlib_cli_output (vm, d " LRU min session timeout %llu (now %llu)",      \
                       sess_timeout_time, now);                               \
      clib_dlist_addhead (tsm->lru_pool, tsm->n##_lru_head_index,             \
                          oldest_index);                                      \
    }
      _ (tcp_estab, "established tcp");
      _ (tcp_trans, "transitory tcp");
      _ (udp, "udp");
      _ (unk_proto, "unknown protocol");
      _ (icmp, "icmp");
#undef _
    }
}
 
static clib_error_t *
nat44_show_summary_command_fn (vlib_main_t * vm, unformat_input_t * input,
                               vlib_cli_command_t * cmd)
{
  snat_main_per_thread_data_t *tsm;
  snat_main_t *sm = &snat_main;
  snat_session_t *s;
 
  u32 count = 0;
 
  u64 now = vlib_time_now (vm);
  u64 sess_timeout_time = 0;
 
  u32 udp_sessions = 0;
  u32 tcp_sessions = 0;
  u32 icmp_sessions = 0;
 
  u32 timed_out = 0;
  u32 transitory = 0;
  u32 transitory_wait_closed = 0;
  u32 transitory_closed = 0;
  u32 established = 0;
 
  u32 fib;
 
  for (fib = 0; fib < vec_len (sm->max_translations_per_fib); fib++)
    vlib_cli_output (vm, "max translations per thread: %u fib %u",
                     sm->max_translations_per_fib[fib], fib);
 
  if (sm->num_workers > 1)
    {
      vec_foreach (tsm, sm->per_thread_data)
        {
          pool_foreach (s, tsm->sessions)
           {
            sess_timeout_time = s->last_heard +
              (f64) nat44_session_get_timeout (sm, s);
            if (now >= sess_timeout_time)
              timed_out++;
 
            switch (s->nat_proto)
              {
              case NAT_PROTOCOL_ICMP:
                icmp_sessions++;
                break;
              case NAT_PROTOCOL_TCP:
                tcp_sessions++;
                if (s->state)
                  {
                    if (s->tcp_closed_timestamp)
                      {
                        if (now >= s->tcp_closed_timestamp)
                          {
                            ++transitory_closed;
                          }
                        else
                          {
                            ++transitory_wait_closed;
                          }
                      }
                    transitory++;
                  }
                else
                  established++;
                break;
              case NAT_PROTOCOL_UDP:
              default:
                udp_sessions++;
                break;
              }
          }
          nat44_show_lru_summary (vm, tsm, now, sess_timeout_time);
          count += pool_elts (tsm->sessions);
        }
    }
  else
    {
      tsm = vec_elt_at_index (sm->per_thread_data, sm->num_workers);
      pool_foreach (s, tsm->sessions)
       {
        sess_timeout_time = s->last_heard +
            (f64) nat44_session_get_timeout (sm, s);
        if (now >= sess_timeout_time)
          timed_out++;
 
        switch (s->nat_proto)
          {
          case NAT_PROTOCOL_ICMP:
            icmp_sessions++;
            break;
          case NAT_PROTOCOL_TCP:
            tcp_sessions++;
            if (s->state)
              {
                if (s->tcp_closed_timestamp)
                  {
                    if (now >= s->tcp_closed_timestamp)
                      {
                        ++transitory_closed;
                      }
                    else
                      {
                        ++transitory_wait_closed;
                      }
                  }
                transitory++;
              }
            else
              established++;
            break;
          case NAT_PROTOCOL_UDP:
          default:
            udp_sessions++;
            break;
          }
      }
      nat44_show_lru_summary (vm, tsm, now, sess_timeout_time);
      count = pool_elts (tsm->sessions);
    }
 
  vlib_cli_output (vm, "total timed out sessions: %u", timed_out);
  vlib_cli_output (vm, "total sessions: %u", count);
  vlib_cli_output (vm, "total tcp sessions: %u", tcp_sessions);
  vlib_cli_output (vm, "total tcp established sessions: %u", established);
  vlib_cli_output (vm, "total tcp transitory sessions: %u", transitory);
  vlib_cli_output (vm, "total tcp transitory (WAIT-CLOSED) sessions: %u",
                   transitory_wait_closed);
  vlib_cli_output (vm, "total tcp transitory (CLOSED) sessions: %u",
                   transitory_closed);
  vlib_cli_output (vm, "total udp sessions: %u", udp_sessions);
  vlib_cli_output (vm, "total icmp sessions: %u", icmp_sessions);
  return 0;
}
 
static clib_error_t *
nat44_show_addresses_command_fn (vlib_main_t * vm, unformat_input_t * input,
                                 vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_address_t *ap;
 
  vlib_cli_output (vm, "NAT44 pool addresses:");
  vec_foreach (ap, sm->addresses)
    {
      vlib_cli_output (vm, "%U", format_ip4_address, &ap->addr);
      if (ap->fib_index != ~0)
          vlib_cli_output (vm, "  tenant VRF: %u",
            fib_table_get(ap->fib_index, FIB_PROTOCOL_IP4)->ft_table_id);
      else
        vlib_cli_output (vm, "  tenant VRF independent");
    #define _(N, i, n, s) \
      vlib_cli_output (vm, "  %d busy %s ports", ap->busy_##n##_ports, s);
      foreach_nat_protocol
    #undef _
    }
  vlib_cli_output (vm, "NAT44 twice-nat pool addresses:");
  vec_foreach (ap, sm->twice_nat_addresses)
    {
      vlib_cli_output (vm, "%U", format_ip4_address, &ap->addr);
      if (ap->fib_index != ~0)
          vlib_cli_output (vm, "  tenant VRF: %u",
            fib_table_get(ap->fib_index, FIB_PROTOCOL_IP4)->ft_table_id);
      else
        vlib_cli_output (vm, "  tenant VRF independent");
    #define _(N, i, n, s) \
      vlib_cli_output (vm, "  %d busy %s ports", ap->busy_##n##_ports, s);
      foreach_nat_protocol
    #undef _
    }
  return 0;
}
 
static clib_error_t *
snat_feature_command_fn (vlib_main_t * vm,
                         unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  vnet_main_t *vnm = vnet_get_main ();
  clib_error_t *error = 0;
  u32 sw_if_index;
  u32 *inside_sw_if_indices = 0;
  u32 *outside_sw_if_indices = 0;
  u8 is_output_feature = 0;
  int is_del = 0;
  int i;
 
  sw_if_index = ~0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "in %U", unformat_vnet_sw_interface,
                    vnm, &sw_if_index))
        vec_add1 (inside_sw_if_indices, sw_if_index);
      else if (unformat (line_input, "out %U", unformat_vnet_sw_interface,
                         vnm, &sw_if_index))
        vec_add1 (outside_sw_if_indices, sw_if_index);
      else if (unformat (line_input, "output-feature"))
        is_output_feature = 1;
      else if (unformat (line_input, "del"))
        is_del = 1;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (vec_len (inside_sw_if_indices))
    {
      for (i = 0; i < vec_len (inside_sw_if_indices); i++)
        {
          sw_if_index = inside_sw_if_indices[i];
          if (is_output_feature)
            {
              if (snat_interface_add_del_output_feature
                  (sw_if_index, 1, is_del))
                {
                  error = clib_error_return (0, "%s %U failed",
                                             is_del ? "del" : "add",
                                             format_vnet_sw_if_index_name,
                                             vnm, sw_if_index);
                  goto done;
                }
            }
          else
            {
              if (snat_interface_add_del (sw_if_index, 1, is_del))
                {
                  error = clib_error_return (0, "%s %U failed",
                                             is_del ? "del" : "add",
                                             format_vnet_sw_if_index_name,
                                             vnm, sw_if_index);
                  goto done;
                }
            }
        }
    }
 
  if (vec_len (outside_sw_if_indices))
    {
      for (i = 0; i < vec_len (outside_sw_if_indices); i++)
        {
          sw_if_index = outside_sw_if_indices[i];
          if (is_output_feature)
            {
              if (snat_interface_add_del_output_feature
                  (sw_if_index, 0, is_del))
                {
                  error = clib_error_return (0, "%s %U failed",
                                             is_del ? "del" : "add",
                                             format_vnet_sw_if_index_name,
                                             vnm, sw_if_index);
                  goto done;
                }
            }
          else
            {
              if (snat_interface_add_del (sw_if_index, 0, is_del))
                {
                  error = clib_error_return (0, "%s %U failed",
                                             is_del ? "del" : "add",
                                             format_vnet_sw_if_index_name,
                                             vnm, sw_if_index);
                  goto done;
                }
            }
        }
    }
 
done:
  unformat_free (line_input);
  vec_free (inside_sw_if_indices);
  vec_free (outside_sw_if_indices);
 
  return error;
}
 
static clib_error_t *
nat44_show_interfaces_command_fn (vlib_main_t * vm, unformat_input_t * input,
                                  vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_interface_t *i;
  vnet_main_t *vnm = vnet_get_main ();
 
  vlib_cli_output (vm, "NAT44 interfaces:");
  pool_foreach (i, sm->interfaces)
   {
    vlib_cli_output (vm, " %U %s", format_vnet_sw_if_index_name, vnm,
                     i->sw_if_index,
                     (nat_interface_is_inside(i) &&
                      nat_interface_is_outside(i)) ? "in out" :
                     (nat_interface_is_inside(i) ? "in" : "out"));
  }
 
  pool_foreach (i, sm->output_feature_interfaces)
   {
    vlib_cli_output (vm, " %U output-feature %s",
                     format_vnet_sw_if_index_name, vnm,
                     i->sw_if_index,
                     (nat_interface_is_inside(i) &&
                      nat_interface_is_outside(i)) ? "in out" :
                     (nat_interface_is_inside(i) ? "in" : "out"));
  }
 
  return 0;
}
 
static clib_error_t *
add_static_mapping_command_fn (vlib_main_t * vm,
                               unformat_input_t * input,
                               vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr, exact_addr;
  u32 l_port = 0, e_port = 0, vrf_id = ~0;
  int is_add = 1, addr_only = 1, rv, exact = 0;
  u32 sw_if_index = ~0;
  vnet_main_t *vnm = vnet_get_main ();
  nat_protocol_t proto = NAT_PROTOCOL_OTHER;
  u8 proto_set = 0;
  twice_nat_type_t twice_nat = TWICE_NAT_DISABLED;
  u8 out2in_only = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U %u", unformat_ip4_address, &l_addr,
                    &l_port))
        addr_only = 0;
      else
        if (unformat (line_input, "local %U", unformat_ip4_address, &l_addr))
        ;
      else if (unformat (line_input, "external %U %u", unformat_ip4_address,
                         &e_addr, &e_port))
        addr_only = 0;
      else if (unformat (line_input, "external %U", unformat_ip4_address,
                         &e_addr))
        ;
      else if (unformat (line_input, "external %U %u",
                         unformat_vnet_sw_interface, vnm, &sw_if_index,
                         &e_port))
        addr_only = 0;
      else if (unformat (line_input, "external %U",
                         unformat_vnet_sw_interface, vnm, &sw_if_index))
        ;
      else if (unformat (line_input, "exact %U", unformat_ip4_address,
                         &exact_addr))
        exact = 1;
      else if (unformat (line_input, "vrf %u", &vrf_id))
        ;
      else if (unformat (line_input, "%U", unformat_nat_protocol, &proto))
        proto_set = 1;
      else if (unformat (line_input, "twice-nat"))
        twice_nat = TWICE_NAT;
      else if (unformat (line_input, "self-twice-nat"))
        twice_nat = TWICE_NAT_SELF;
      else if (unformat (line_input, "out2in-only"))
        out2in_only = 1;
      else if (unformat (line_input, "del"))
        is_add = 0;
      else
        {
          error = clib_error_return (0, "unknown input: '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (twice_nat && addr_only)
    {
      error = clib_error_return (0, "twice NAT only for 1:1 NAPT");
      goto done;
    }
 
  if (addr_only)
    {
      if (proto_set)
        {
          error =
            clib_error_return (0,
                               "address only mapping doesn't support protocol");
          goto done;
        }
    }
  else if (!proto_set)
    {
      error = clib_error_return (0, "protocol is required");
      goto done;
    }
 
  rv = snat_add_static_mapping (
    l_addr, e_addr, clib_host_to_net_u16 (l_port),
    clib_host_to_net_u16 (e_port), vrf_id, addr_only, sw_if_index, proto,
    is_add, twice_nat, out2in_only, 0, 0, exact_addr, exact);
 
  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
        error = clib_error_return (0, "External address must be allocated.");
      else
        error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_FIB:
      error = clib_error_return (0, "No such VRF id.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    default:
      break;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
add_identity_mapping_command_fn (vlib_main_t * vm,
                                 unformat_input_t * input,
                                 vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t addr, pool_addr = { 0 };
  u32 port = 0, vrf_id = ~0;
  int is_add = 1;
  int addr_only = 1;
  u32 sw_if_index = ~0;
  vnet_main_t *vnm = vnet_get_main ();
  int rv;
  nat_protocol_t proto;
 
  addr.as_u32 = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_ip4_address, &addr))
        ;
      else if (unformat (line_input, "external %U",
                         unformat_vnet_sw_interface, vnm, &sw_if_index))
        ;
      else if (unformat (line_input, "vrf %u", &vrf_id))
        ;
      else if (unformat (line_input, "%U %u", unformat_nat_protocol, &proto,
                         &port))
        addr_only = 0;
      else if (unformat (line_input, "del"))
        is_add = 0;
      else
        {
          error = clib_error_return (0, "unknown input: '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  rv = snat_add_static_mapping (
    addr, addr, clib_host_to_net_u16 (port), clib_host_to_net_u16 (port),
    vrf_id, addr_only, sw_if_index, proto, is_add, 0, 0, 0, 1, pool_addr, 0);
 
  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
        error = clib_error_return (0, "External address must be allocated.");
      else
        error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_FIB:
      error = clib_error_return (0, "No such VRF id.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    default:
      break;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
add_lb_static_mapping_command_fn (vlib_main_t * vm,
                                  unformat_input_t * input,
                                  vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr;
  u32 l_port = 0, e_port = 0, vrf_id = 0, probability = 0, affinity = 0;
  int is_add = 1;
  int rv;
  nat_protocol_t proto;
  u8 proto_set = 0;
  nat44_lb_addr_port_t *locals = 0, local;
  twice_nat_type_t twice_nat = TWICE_NAT_DISABLED;
  u8 out2in_only = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U:%u probability %u",
                    unformat_ip4_address, &l_addr, &l_port, &probability))
        {
          clib_memset (&local, 0, sizeof (local));
          local.addr = l_addr;
          local.port = (u16) l_port;
          local.probability = (u8) probability;
          vec_add1 (locals, local);
        }
      else if (unformat (line_input, "local %U:%u vrf %u probability %u",
                         unformat_ip4_address, &l_addr, &l_port, &vrf_id,
                         &probability))
        {
          clib_memset (&local, 0, sizeof (local));
          local.addr = l_addr;
          local.port = (u16) l_port;
          local.probability = (u8) probability;
          local.vrf_id = vrf_id;
          vec_add1 (locals, local);
        }
      else if (unformat (line_input, "external %U:%u", unformat_ip4_address,
                         &e_addr, &e_port))
        ;
      else if (unformat (line_input, "protocol %U", unformat_nat_protocol,
                         &proto))
        proto_set = 1;
      else if (unformat (line_input, "twice-nat"))
        twice_nat = TWICE_NAT;
      else if (unformat (line_input, "self-twice-nat"))
        twice_nat = TWICE_NAT_SELF;
      else if (unformat (line_input, "out2in-only"))
        out2in_only = 1;
      else if (unformat (line_input, "del"))
        is_add = 0;
      else if (unformat (line_input, "affinity %u", &affinity))
        ;
      else
        {
          error = clib_error_return (0, "unknown input: '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (vec_len (locals) < 2)
    {
      error = clib_error_return (0, "at least two local must be set");
      goto done;
    }
 
  if (!proto_set)
    {
      error = clib_error_return (0, "missing protocol");
      goto done;
    }
 
  rv = nat44_add_del_lb_static_mapping (e_addr, (u16) e_port, proto, locals,
                                        is_add, twice_nat, out2in_only, 0,
                                        affinity);
 
  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External port already in use.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      if (is_add)
        error = clib_error_return (0, "External address must be allocated.");
      else
        error = clib_error_return (0, "Mapping not exist.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Mapping already exist.");
      goto done;
    default:
      break;
    }
 
done:
  unformat_free (line_input);
  vec_free (locals);
 
  return error;
}
 
static clib_error_t *
add_lb_backend_command_fn (vlib_main_t * vm,
                           unformat_input_t * input, vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  ip4_address_t l_addr, e_addr;
  u32 l_port = 0, e_port = 0, vrf_id = 0, probability = 0;
  int is_add = 1;
  int rv;
  nat_protocol_t proto;
  u8 proto_set = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "local %U:%u probability %u",
                    unformat_ip4_address, &l_addr, &l_port, &probability))
        ;
      else if (unformat (line_input, "local %U:%u vrf %u probability %u",
                         unformat_ip4_address, &l_addr, &l_port, &vrf_id,
                         &probability))
        ;
      else if (unformat (line_input, "external %U:%u", unformat_ip4_address,
                         &e_addr, &e_port))
        ;
      else if (unformat (line_input, "protocol %U", unformat_nat_protocol,
                         &proto))
        proto_set = 1;
      else if (unformat (line_input, "del"))
        is_add = 0;
      else
        {
          error = clib_error_return (0, "unknown input: '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (!l_port || !e_port)
    {
      error = clib_error_return (0, "local or external must be set");
      goto done;
    }
 
  if (!proto_set)
    {
      error = clib_error_return (0, "missing protocol");
      goto done;
    }
 
  rv =
    nat44_lb_static_mapping_add_del_local (e_addr, (u16) e_port, l_addr,
                                           l_port, proto, vrf_id, probability,
                                           is_add);
 
  switch (rv)
    {
    case VNET_API_ERROR_INVALID_VALUE:
      error = clib_error_return (0, "External is not load-balancing static "
                                 "mapping.");
      goto done;
    case VNET_API_ERROR_NO_SUCH_ENTRY:
      error = clib_error_return (0, "Mapping or back-end not exist.");
      goto done;
    case VNET_API_ERROR_VALUE_EXIST:
      error = clib_error_return (0, "Back-end already exist.");
      goto done;
    case VNET_API_ERROR_UNSPECIFIED:
      error = clib_error_return (0, "At least two back-ends must remain");
      goto done;
    default:
      break;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat44_show_static_mappings_command_fn (vlib_main_t * vm,
                                       unformat_input_t * input,
                                       vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  snat_static_mapping_t *m;
  snat_static_map_resolve_t *rp;
 
  vlib_cli_output (vm, "NAT44 static mappings:");
  pool_foreach (m, sm->static_mappings)
   {
    vlib_cli_output (vm, " %U", format_snat_static_mapping, m);
  }
  vec_foreach (rp, sm->to_resolve)
    vlib_cli_output (vm, " %U", format_snat_static_map_to_resolve, rp);
 
  return 0;
}
 
static clib_error_t *
snat_add_interface_address_command_fn (vlib_main_t * vm,
                                       unformat_input_t * input,
                                       vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  u32 sw_if_index;
  int rv;
  int is_del = 0;
  clib_error_t *error = 0;
  u8 twice_nat = 0;
 
  /* Get a line of input. */
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%U", unformat_vnet_sw_interface,
                    sm->vnet_main, &sw_if_index))
        ;
      else if (unformat (line_input, "twice-nat"))
        twice_nat = 1;
      else if (unformat (line_input, "del"))
        is_del = 1;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  rv = snat_add_interface_address (sm, sw_if_index, is_del, twice_nat);
 
  switch (rv)
    {
    case 0:
      break;
 
    default:
      error = clib_error_return (0, "snat_add_interface_address returned %d",
                                 rv);
      goto done;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat44_show_interface_address_command_fn (vlib_main_t * vm,
                                         unformat_input_t * input,
                                         vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  vnet_main_t *vnm = vnet_get_main ();
  u32 *sw_if_index;
 
  vlib_cli_output (vm, "NAT44 pool address interfaces:");
  vec_foreach (sw_if_index, sm->auto_add_sw_if_indices)
    {
      vlib_cli_output (vm, " %U", format_vnet_sw_if_index_name, vnm,
                       *sw_if_index);
    }
  vlib_cli_output (vm, "NAT44 twice-nat pool address interfaces:");
  vec_foreach (sw_if_index, sm->auto_add_sw_if_indices_twice_nat)
    {
      vlib_cli_output (vm, " %U", format_vnet_sw_if_index_name, vnm,
                       *sw_if_index);
    }
 
  return 0;
}
 
static clib_error_t *
nat44_show_sessions_command_fn (vlib_main_t * vm, unformat_input_t * input,
                                vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  snat_main_per_thread_data_t *tsm;
  snat_main_t *sm = &snat_main;
 
  int i = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    goto print;
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      error = clib_error_return (0, "unknown input '%U'",
                                 format_unformat_error, line_input);
      break;
    }
  unformat_free (line_input);
 
print:
    vlib_cli_output (vm, "NAT44 ED sessions:");
 
  vec_foreach_index (i, sm->per_thread_data)
    {
      tsm = vec_elt_at_index (sm->per_thread_data, i);
 
      vlib_cli_output (vm, "-------- thread %d %s: %d sessions --------\n",
                       i, vlib_worker_threads[i].name,
                       pool_elts (tsm->sessions));
 
          snat_session_t *s;
          pool_foreach (s, tsm->sessions)
           {
            vlib_cli_output (vm, "  %U\n", format_snat_session, tsm, s);
          }
    }
  return error;
}
 
static clib_error_t *
nat44_set_session_limit_command_fn (vlib_main_t * vm,
                                    unformat_input_t * input,
                                    vlib_cli_command_t * cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
 
  u32 session_limit = 0, vrf_id = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%u", &session_limit))
        ;
      else if (unformat (line_input, "vrf %u", &vrf_id))
        ;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (!session_limit)
    error = clib_error_return (0, "missing value of session limit");
  else if (nat44_update_session_limit (session_limit, vrf_id))
    error = clib_error_return (0, "nat44_set_session_limit failed");
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
nat44_del_session_command_fn (vlib_main_t * vm,
                              unformat_input_t * input,
                              vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  u32 port = 0, eh_port = 0, vrf_id = sm->outside_vrf_id;
  clib_error_t *error = 0;
  ip4_address_t addr, eh_addr;
  nat_protocol_t proto;
  int is_in = 0;
  int rv;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat
          (line_input, "%U:%u %U", unformat_ip4_address, &addr, &port,
           unformat_nat_protocol, &proto))
        ;
      else if (unformat (line_input, "in"))
        {
          is_in = 1;
          vrf_id = sm->inside_vrf_id;
        }
      else if (unformat (line_input, "out"))
        {
          is_in = 0;
          vrf_id = sm->outside_vrf_id;
        }
      else if (unformat (line_input, "vrf %u", &vrf_id))
        ;
      else if (unformat (line_input, "external-host %U:%u",
                         unformat_ip4_address, &eh_addr, &eh_port))
        ;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
    rv =
      nat44_del_ed_session (sm, &addr, clib_host_to_net_u16 (port), &eh_addr,
                            clib_host_to_net_u16 (eh_port),
                            nat_proto_to_ip_proto (proto), vrf_id, is_in);
 
  switch (rv)
    {
    case 0:
      break;
 
    default:
      error = clib_error_return (0, "nat44_del_session returned %d", rv);
      goto done;
    }
 
done:
  unformat_free (line_input);
 
  return error;
}
 
static clib_error_t *
snat_forwarding_set_command_fn (vlib_main_t * vm,
                                unformat_input_t * input,
                                vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
 
  u8 enable_set = 0, enable = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (!enable_set)
        {
          enable_set = 1;
          if (unformat (line_input, "disable"))
            ;
          else if (unformat (line_input, "enable"))
            enable = 1;
        }
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
 
  if (!enable_set)
    error = clib_error_return (0, "expected enable | disable");
  else
    sm->forwarding_enabled = enable;
 
done:
  unformat_free (line_input);
  return error;
}
 
static clib_error_t *
set_timeout_command_fn (vlib_main_t * vm,
                        unformat_input_t * input, vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "udp %u", &sm->timeouts.udp));
      else if (unformat (line_input, "tcp-established %u",
                         &sm->timeouts.tcp.established));
      else if (unformat (line_input, "tcp-transitory %u",
                         &sm->timeouts.tcp.transitory));
      else if (unformat (line_input, "icmp %u", &sm->timeouts.icmp));
      else if (unformat (line_input, "reset"))
        nat_reset_timeouts (&sm->timeouts);
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
done:
  unformat_free (line_input);
  return error;
}
 
static clib_error_t *
nat_show_timeouts_command_fn (vlib_main_t * vm,
                              unformat_input_t * input,
                              vlib_cli_command_t * cmd)
{
  snat_main_t *sm = &snat_main;
 
  vlib_cli_output (vm, "udp timeout: %dsec", sm->timeouts.udp);
  vlib_cli_output (vm, "tcp-established timeout: %dsec",
                   sm->timeouts.tcp.established);
  vlib_cli_output (vm, "tcp-transitory timeout: %dsec",
                   sm->timeouts.tcp.transitory);
  vlib_cli_output (vm, "icmp timeout: %dsec", sm->timeouts.icmp);
 
  return 0;
}
 
static clib_error_t *
set_frame_queue_nelts_command_fn (vlib_main_t *vm, unformat_input_t *input,
                                  vlib_cli_command_t *cmd)
{
  unformat_input_t _line_input, *line_input = &_line_input;
  clib_error_t *error = 0;
  u32 frame_queue_nelts = 0;
 
  if (!unformat_user (input, unformat_line_input, line_input))
    return clib_error_return (0, NAT44_ED_EXPECTED_ARGUMENT);
 
  while (unformat_check_input (line_input) != UNFORMAT_END_OF_INPUT)
    {
      if (unformat (line_input, "%u", &frame_queue_nelts))
        ;
      else
        {
          error = clib_error_return (0, "unknown input '%U'",
                                     format_unformat_error, line_input);
          goto done;
        }
    }
  if (!frame_queue_nelts)
    {
      error = clib_error_return (0, "frame_queue_nelts cannot be zero");
      goto done;
    }
  if (nat44_ed_set_frame_queue_nelts (frame_queue_nelts) != 0)
    {
      error = clib_error_return (0, "snat_set_frame_queue_nelts failed");
      goto done;
    }
done:
  unformat_free (line_input);
  return error;
}
 
/*?
 * @cliexpar
 * @cliexstart{nat44}
 * Enable nat44 plugin
 * To enable nat44-ed, use:
 *  vpp# nat44 enable
 * To disable nat44-ed, use:
 *  vpp# nat44 disable
 * To enable nat44-ed static mapping with connection tracking, use:
 *  vpp# nat44-ed enable static-mapping connection-tracking
 * To set inside-vrf outside-vrf, use:
 *  vpp# nat44 enable inside-vrf <id> outside-vrf <id>
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_ed_enable_disable_command, static) = {
  .path = "nat44",
  .short_help = "nat44 <enable [sessions <max-number>] [static-mapping-only "
                "connection-tracking] [inside-vrf <vrf-id>] "
                "[outside-vrf <vrf-id>]>|disable",
  .function = nat44_ed_enable_disable_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{set snat workers}
 * Set NAT workers if 2 or more workers available, use:
 *  vpp# set snat workers 0-2,5
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_workers_command, static) = {
  .path = "set nat workers",
  .function = set_workers_command_fn,
  .short_help = "set nat workers <workers-list>",
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat workers}
 * Show NAT workers.
 *  vpp# show nat workers:
 *  2 workers
 *    vpp_wk_0
 *    vpp_wk_1
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_workers_command, static) = {
  .path = "show nat workers",
  .short_help = "show nat workers",
  .function = nat_show_workers_commnad_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{set nat timeout}
 * Set values of timeouts for NAT sessions (in seconds), use:
 *  vpp# set nat timeout udp 120 tcp-established 7500 tcp-transitory 250 icmp 90
 * To reset default values use:
 *  vpp# set nat timeout reset
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_timeout_command, static) = {
  .path = "set nat timeout",
  .function = set_timeout_command_fn,
  .short_help =
    "set nat timeout [udp <sec> | tcp-established <sec> "
    "tcp-transitory <sec> | icmp <sec> | reset]",
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat timeouts}
 * Show values of timeouts for NAT sessions.
 * vpp# show nat timeouts
 * udp timeout: 300sec
 * tcp-established timeout: 7440sec
 * tcp-transitory timeout: 240sec
 * icmp timeout: 60sec
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_timeouts_command, static) = {
  .path = "show nat timeouts",
  .short_help = "show nat timeouts",
  .function = nat_show_timeouts_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{set nat frame-queue-nelts}
 * Set number of worker handoff frame queue elements.
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_frame_queue_nelts_command, static) = {
  .path = "set nat frame-queue-nelts",
  .function = set_frame_queue_nelts_command_fn,
  .short_help = "set nat frame-queue-nelts <number>",
};
 
/*?
 * @cliexpar
 * @cliexstart{nat set logging level}
 * To set NAT logging level use:
 * Set nat logging level
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_set_log_level_command, static) = {
  .path = "nat set logging level",
  .function = snat_set_log_level_command_fn,
  .short_help = "nat set logging level <level>",
};
 
/*?
 * @cliexpar
 * @cliexstart{snat ipfix logging}
 * To enable NAT IPFIX logging use:
 *  vpp# nat ipfix logging
 * To set IPFIX exporter use:
 *  vpp# set ipfix exporter collector 10.10.10.3 src 10.10.10.1
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_ipfix_logging_enable_disable_command, static) = {
  .path = "nat ipfix logging",
  .function = snat_ipfix_logging_enable_disable_command_fn,
  .short_help = "nat ipfix logging disable|<enable [domain <domain-id>] "
                "[src-port <port>]>",
};
 
/*?
 * @cliexpar
 * @cliexstart{nat mss-clamping}
 * Set TCP MSS rewriting configuration
 * To enable TCP MSS rewriting use:
 *  vpp# nat mss-clamping 1452
 * To disbale TCP MSS rewriting use:
 *  vpp# nat mss-clamping disable
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_set_mss_clamping_command, static) = {
    .path = "nat mss-clamping",
    .short_help = "nat mss-clamping <mss-value>|disable",
    .function = nat_set_mss_clamping_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat mss-clamping}
 * Show TCP MSS rewriting configuration
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat_show_mss_clamping_command, static) = {
    .path = "show nat mss-clamping",
    .short_help = "show nat mss-clamping",
    .function = nat_show_mss_clamping_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 hash tables}
 * Show NAT44 hash tables
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_hash, static) = {
  .path = "show nat44 hash tables",
  .short_help = "show nat44 hash tables [detail|verbose]",
  .function = nat44_show_hash_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add address}
 * Add/delete NAT44 pool address.
 * To add NAT44 pool address use:
 *  vpp# nat44 add address 172.16.1.3
 *  vpp# nat44 add address 172.16.2.2 - 172.16.2.24
 * To add NAT44 pool address for specific tenant (identified by VRF id) use:
 *  vpp# nat44 add address 172.16.1.3 tenant-vrf 10
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_address_command, static) = {
  .path = "nat44 add address",
  .short_help = "nat44 add address <ip4-range-start> [- <ip4-range-end>] "
                "[tenant-vrf <vrf-id>] [twice-nat] [del]",
  .function = add_address_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 summary}
 * Show NAT44 summary
 * vpp# show nat44 summary
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_summary_command, static) = {
  .path = "show nat44 summary",
  .short_help = "show nat44 summary",
  .function = nat44_show_summary_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 addresses}
 * Show NAT44 pool addresses.
 * vpp# show nat44 addresses
 * NAT44 pool addresses:
 * 172.16.2.2
 *   tenant VRF independent
 *   10 busy udp ports
 *   0 busy tcp ports
 *   0 busy icmp ports
 * 172.16.1.3
 *   tenant VRF: 10
 *   0 busy udp ports
 *   2 busy tcp ports
 *   0 busy icmp ports
 * NAT44 twice-nat pool addresses:
 * 10.20.30.72
 *   tenant VRF independent
 *   0 busy udp ports
 *   0 busy tcp ports
 *   0 busy icmp ports
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_addresses_command, static) = {
  .path = "show nat44 addresses",
  .short_help = "show nat44 addresses",
  .function = nat44_show_addresses_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{set interface nat44}
 * Enable/disable NAT44 feature on the interface.
 * To enable NAT44 feature with local network interface use:
 *  vpp# set interface nat44 in GigabitEthernet0/8/0
 * To enable NAT44 feature with external network interface use:
 *  vpp# set interface nat44 out GigabitEthernet0/a/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (set_interface_snat_command, static) = {
  .path = "set interface nat44",
  .function = snat_feature_command_fn,
  .short_help = "set interface nat44 in <intfc> out <intfc> [output-feature] "
                "[del]",
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 interfaces}
 * Show interfaces with NAT44 feature.
 * vpp# show nat44 interfaces
 * NAT44 interfaces:
 *  GigabitEthernet0/8/0 in
 *  GigabitEthernet0/a/0 out
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_interfaces_command, static) = {
  .path = "show nat44 interfaces",
  .short_help = "show nat44 interfaces",
  .function = nat44_show_interfaces_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add static mapping}
 * Static mapping allows hosts on the external network to initiate connection
 * to to the local network host.
 * To create static mapping between local host address 10.0.0.3 port 6303 and
 * external address 4.4.4.4 port 3606 for TCP protocol use:
 *  vpp# nat44 add static mapping tcp local 10.0.0.3 6303 external 4.4.4.4 3606
 * If not runnig "static mapping only" NAT plugin mode use before:
 *  vpp# nat44 add address 4.4.4.4
 * To create address only static mapping between local and external address use:
 *  vpp# nat44 add static mapping local 10.0.0.3 external 4.4.4.4
 * To create ICMP static mapping between local and external with ICMP echo
 * identifier 10 use:
 *  vpp# nat44 add static mapping icmp local 10.0.0.3 10 external 4.4.4.4 10
 * To force use of specific pool address, vrf independent
 *  vpp# nat44 add static mapping local 10.0.0.2 1234 external 10.0.2.2 1234 twice-nat exact 10.0.1.2
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_static_mapping_command, static) = {
  .path = "nat44 add static mapping",
  .function = add_static_mapping_command_fn,
  .short_help =
    "nat44 add static mapping tcp|udp|icmp local <addr> [<port|icmp-echo-id>] "
    "external <addr> [<port|icmp-echo-id>] [vrf <table-id>] [twice-nat|self-twice-nat] "
    "[out2in-only] [exact <pool-addr>] [del]",
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add identity mapping}
 * Identity mapping translate an IP address to itself.
 * To create identity mapping for address 10.0.0.3 port 6303 for TCP protocol
 * use:
 *  vpp# nat44 add identity mapping 10.0.0.3 tcp 6303
 * To create identity mapping for address 10.0.0.3 use:
 *  vpp# nat44 add identity mapping 10.0.0.3
 * To create identity mapping for DHCP addressed interface use:
 *  vpp# nat44 add identity mapping external GigabitEthernet0/a/0 tcp 3606
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_identity_mapping_command, static) = {
  .path = "nat44 add identity mapping",
  .function = add_identity_mapping_command_fn,
  .short_help = "nat44 add identity mapping <ip4-addr>|external <interface> "
    "[<protocol> <port>] [vrf <table-id>] [del]",
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add load-balancing static mapping}
 * Service load balancing using NAT44
 * To add static mapping with load balancing for service with external IP
 * address 1.2.3.4 and TCP port 80 and mapped to 2 local servers
 * 10.100.10.10:8080 and 10.100.10.20:8080 with probability 80% resp. 20% use:
 *  vpp# nat44 add load-balancing static mapping protocol tcp external 1.2.3.4:80 local 10.100.10.10:8080 probability 80 local 10.100.10.20:8080 probability 20
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_lb_static_mapping_command, static) = {
  .path = "nat44 add load-balancing static mapping",
  .function = add_lb_static_mapping_command_fn,
  .short_help =
    "nat44 add load-balancing static mapping protocol tcp|udp "
    "external <addr>:<port> local <addr>:<port> [vrf <table-id>] "
    "probability <n> [twice-nat|self-twice-nat] [out2in-only] "
    "[affinity <timeout-seconds>] [del]",
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add load-balancing static mapping}
 * Modify service load balancing using NAT44
 * To add new back-end server 10.100.10.30:8080 for service load balancing
 * static mapping with external IP address 1.2.3.4 and TCP port 80 use:
 *  vpp# nat44 add load-balancing back-end protocol tcp external 1.2.3.4:80 local 10.100.10.30:8080 probability 25
 * @cliexend
?*/
VLIB_CLI_COMMAND (add_lb_backend_command, static) = {
  .path = "nat44 add load-balancing back-end",
  .function = add_lb_backend_command_fn,
  .short_help =
    "nat44 add load-balancing back-end protocol tcp|udp "
    "external <addr>:<port> local <addr>:<port> [vrf <table-id>] "
    "probability <n> [del]",
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 static mappings}
 * Show NAT44 static mappings.
 * vpp# show nat44 static mappings
 * NAT44 static mappings:
 *  local 10.0.0.3 external 4.4.4.4 vrf 0
 *  tcp local 192.168.0.4:6303 external 4.4.4.3:3606 vrf 0
 *  tcp vrf 0 external 1.2.3.4:80  out2in-only
 *   local 10.100.10.10:8080 probability 80
 *   local 10.100.10.20:8080 probability 20
 *  tcp local 10.100.3.8:8080 external 169.10.10.1:80 vrf 0 twice-nat
 *  tcp local 10.0.0.10:3603 external GigabitEthernet0/a/0:6306 vrf 10
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_static_mappings_command, static) = {
  .path = "show nat44 static mappings",
  .short_help = "show nat44 static mappings",
  .function = nat44_show_static_mappings_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 add interface address}
 * Use NAT44 pool address from specific interfce
 * To add NAT44 pool address from specific interface use:
 *  vpp# nat44 add interface address GigabitEthernet0/8/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_add_interface_address_command, static) = {
    .path = "nat44 add interface address",
    .short_help = "nat44 add interface address <interface> [twice-nat] [del]",
    .function = snat_add_interface_address_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 interface address}
 * Show NAT44 pool address interfaces
 * vpp# show nat44 interface address
 * NAT44 pool address interfaces:
 *  GigabitEthernet0/a/0
 * NAT44 twice-nat pool address interfaces:
 *  GigabitEthernet0/8/0
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_interface_address_command, static) = {
  .path = "show nat44 interface address",
  .short_help = "show nat44 interface address",
  .function = nat44_show_interface_address_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{show nat44 sessions}
 * Show NAT44 sessions.
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_show_sessions_command, static) = {
  .path = "show nat44 sessions",
  .short_help = "show nat44 sessions",
  .function = nat44_show_sessions_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{set nat44 session limit}
 * Set NAT44 session limit.
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_set_session_limit_command, static) = {
  .path = "set nat44 session limit",
  .short_help = "set nat44 session limit <limit> [vrf <table-id>]",
  .function = nat44_set_session_limit_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 del session}
 * To administratively delete NAT44 session by inside address and port use:
 *  vpp# nat44 del session in 10.0.0.3:6303 tcp
 * To administratively delete NAT44 session by outside address and port use:
 *  vpp# nat44 del session out 1.0.0.3:6033 udp
 * @cliexend
?*/
VLIB_CLI_COMMAND (nat44_del_session_command, static) = {
    .path = "nat44 del session",
    .short_help = "nat44 del session in|out <addr>:<port> tcp|udp|icmp [vrf <id>] [external-host <addr>:<port>]",
    .function = nat44_del_session_command_fn,
};
 
/*?
 * @cliexpar
 * @cliexstart{nat44 forwarding}
 * Enable or disable forwarding
 * Forward packets which don't match existing translation
 * or static mapping instead of dropping them.
 * To enable forwarding, use:
 *  vpp# nat44 forwarding enable
 * To disable forwarding, use:
 *  vpp# nat44 forwarding disable
 * @cliexend
?*/
VLIB_CLI_COMMAND (snat_forwarding_set_command, static) = {
  .path = "nat44 forwarding",
  .short_help = "nat44 forwarding enable|disable",
  .function = snat_forwarding_set_command_fn,
};
 
/*
 * fd.io coding-style-patch-verification: ON
 *
 * Local Variables:
 * eval: (c-set-style "gnu")
 * End:
 */