Nat64 cli reference

nat64 add interface address

nat64 add interface address <interface> [del]

nat64 add interface address

Add/delete NAT64 pool address from specific (DHCP addressed) interface.
To add NAT64 pool address from specific interface use:
 vpp# nat64 add interface address GigabitEthernet0/8/0

Declaration: nat64_add_interface_address_command src/plugins/nat/nat64/nat64_cli.c line 976

Implementation: nat64_add_interface_address_command_fn

nat64 add pool address

nat64 add pool address <ip4-range-start> [- <ip4-range-end>] [tenant-vrf <vrf-id>] [del]

nat64 add pool address

Add/delete NAT64 pool address.
To add single NAT64 pool address use:
 vpp# nat64 add pool address 10.1.1.10
To add NAT64 pool address range use:
 vpp# nat64 add pool address 10.1.1.2 - 10.1.1.5
To add NAT64 pool address for specific tenant use:
 vpp# nat64 add pool address 10.1.1.100 tenant-vrf 100

Declaration: nat64_add_pool_address_command src/plugins/nat/nat64/nat64_cli.c line 808

Implementation: nat64_add_del_pool_addr_command_fn

nat64 add prefix

nat64 add prefix <ip6-prefix>/<plen> [tenant-vrf <vrf-id>] [del] [interface <interface]

nat64 add prefix

Set NAT64 prefix for generating IPv6 representations of IPv4 addresses.
To set NAT64 global prefix use:
 vpp# nat64 add prefix 2001:db8::/32
To set NAT64 prefix for specific tenant use:
 vpp# nat64 add prefix 2001:db8:122:300::/56 tenant-vrf 10

Declaration: nat64_add_del_prefix_command src/plugins/nat/nat64/nat64_cli.c line 944

Implementation: nat64_add_del_prefix_command_fn

nat64 add static bib

nat64 add static bib <ip6-addr> <port> <ip4-addr> <port> tcp|udp|icmp [vfr <table-id>] [del]

nat64 add static bib

Add/delete NAT64 static BIB entry.
To create NAT64 satatic BIB entry use:
 vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp
 vpp# nat64 add static bib 2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10

Declaration: nat64_add_del_static_bib_command src/plugins/nat/nat64/nat64_cli.c line 873

Implementation: nat64_add_del_static_bib_command_fn

nat64 plugin

nat64 plugin <enable [bib-buckets <count>] [bib-memory <size>] [st-buckets <count>] [st-memory <size>] | disable>

nat64 plugin

Enable/disable NAT64 plugin.
To enable NAT64 plugin use:
 vpp# nat64 plugin enable
To enable NAT64 plugin and configure buckets/memory:
 vpp# nat64 plugin enable bib-buckets <n> bib-memory <s> \
   st-buckets <n> st-memory <s>
To disable NAT64 plugin:
 vpp# nat64 plugin disable

Declaration: nat64_plugin_enable_disable_command src/plugins/nat/nat64/nat64_cli.c line 787

Implementation: nat64_plugin_enable_disable_command_fn

set interface nat64

set interface nat64 in|out <intfc> [del]

set interface nat64

Enable/disable NAT64 feature on the interface.
To enable NAT64 feature with local (IPv6) network interface
GigabitEthernet0/8/0 and external (IPv4) network interface
GigabitEthernet0/a/0 use:
 vpp# set interface nat64 in GigabitEthernet0/8/0 out GigabitEthernet0/a/0

Declaration: set_interface_nat64_command src/plugins/nat/nat64/nat64_cli.c line 841

Implementation: nat64_interface_feature_command_fn

show nat64 bib

show nat64 bib all|tcp|udp|icmp|unknown

show nat64 bib

Show NAT64 BIB entries.
To show NAT64 TCP BIB entries use:
 vpp# show nat64 bib tcp
 NAT64 tcp BIB:
  fd01:1::2 6303 10.0.0.3 62303 tcp vrf 0 dynamic 1 sessions
  2001:db8:c000:221:: 1234 10.1.1.3 5678 tcp vrf 0 static 2 sessions
To show NAT64 UDP BIB entries use:
 vpp# show nat64 bib udp
 NAT64 udp BIB:
  fd01:1::2 6304 10.0.0.3 10546 udp vrf 0 dynamic 10 sessions
  2001:db8:c000:221:: 1234 10.1.1.3 5678 udp vrf 10 static 0 sessions
To show NAT64 ICMP BIB entries use:
 vpp# show nat64 bib icmp
 NAT64 icmp BIB:
  fd01:1::2 6305 10.0.0.3 63209 icmp vrf 10 dynamic 1 sessions

Declaration: show_nat64_bib_command src/plugins/nat/nat64/nat64_cli.c line 900

Implementation: nat64_show_bib_command_fn

show nat64 interfaces

show nat64 interfaces

show nat64 interfaces

Show interfaces with NAT64 feature.
To show interfaces with NAT64 feature use:
 vpp# show nat64 interfaces
 NAT64 interfaces:
  GigabitEthernet0/8/0 in
  GigabitEthernet0/a/0 out

Declaration: show_nat64_interfaces_command src/plugins/nat/nat64/nat64_cli.c line 858

Implementation: nat64_show_interfaces_command_fn

show nat64 pool

show nat64 pool

show nat64 pool

Show NAT64 pool.
 vpp# show nat64 pool
 NAT64 pool:
  10.1.1.3 tenant VRF: 0
  10.1.1.10 tenant VRF: 10

Declaration: show_nat64_pool_command src/plugins/nat/nat64/nat64_cli.c line 825

Implementation: nat64_show_pool_command_fn

show nat64 prefix

show nat64 prefix

show nat64 prefix

Show NAT64 prefix.
To show NAT64 prefix use:
 vpp# show nat64 prefix
 NAT64 prefix:
  2001:db8::/32 tenant-vrf 0
  2001:db8:122:300::/56 tenant-vrf 10

Declaration: show_nat64_prefix_command src/plugins/nat/nat64/nat64_cli.c line 962

Implementation: nat64_show_prefix_command_fn

show nat64 session table

show nat64 session table all|tcp|udp|icmp|unknown

show nat64 session table

Show NAT64 session table.
To show NAT64 TCP session table use:
 vpp# show nat64 session table tcp
 NAT64 tcp session table:
  fd01:1::2 6303 64:ff9b::ac10:202 20 10.0.0.3 62303 172.16.2.2 20 tcp vrf 0
  fd01:3::2 6303 64:ff9b::ac10:202 20 10.0.10.3 21300 172.16.2.2 20 tcp vrf 10
To show NAT64 UDP session table use:
#vpp show nat64 session table udp
NAT64 udp session table:
 fd01:1::2 6304 64:ff9b::ac10:202 20 10.0.0.3 10546 172.16.2.2 20 udp vrf 0
 fd01:3::2 6304 64:ff9b::ac10:202 20 10.0.10.3 58627 172.16.2.2 20 udp vrf 10
 fd01:1::2 1235 64:ff9b::a00:3 4023 10.0.0.3 24488 10.0.0.3 4023 udp vrf 0
 fd01:1::3 23 64:ff9b::a00:3 24488 10.0.0.3 4023 10.0.0.3 24488 udp vrf 0
To show NAT64 ICMP session table use:
#vpp show nat64 session table icmp
NAT64 icmp session table:
 fd01:1::2 64:ff9b::ac10:202 6305 10.0.0.3 172.16.2.2 63209 icmp vrf 0

Declaration: show_nat64_st_command src/plugins/nat/nat64/nat64_cli.c line 928

Implementation: nat64_show_st_command_fn